Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/journal/polimeros/article/doi/10.1590/S0104-14282011005000071
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Effect of Artificial Aging on Polymeric Surge Arresters and Polymer Insulators for Electricity Distribution Networks

Ferreira, Carlos A.; Coser, E.; Angelini, Joceli M. G.; Rossi, José A. D.; Martinez, Manuel L. B.

Downloads: 0
Views: 916

Abstract

A study was conducted to evaluate new and laboratory-aged samples of surge arresters and anchorage polymeric insulators, for 12 and 24 kV networks, which are used by the Rio Grande Energia (RGE). Power Utility Polymeric compounds were analyzed by Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TG), Dynamic-Mechanic Analysis (DMA), Fourier Transformed Infrared Spectroscopy (FTIR) and Scanning Electronic Microscopy (SEM) to verify changes in the insulator properties due to degradation occurred during the experiments. The analyses were carried out before and after 6 months of aging in laboratory devices (weatherometer, 120 °C, salt spray, immersion in water). After the aging experiments, high-voltage electrical tests were also conducted: a radio interference voltage test and, simultaneously, the total and the internal leakage currents were measured to verify the surface degradation of the polymeric material used in the housing. The impulse current test was applied with current values close to 5, 10 and 30 kA, in order to force an internal degradation. Results showed that only surface degradation is detected at the polymer. The main properties of the parts were not affected by the aging. It confirms that polymer insulator and surge arrestor are appropriate for use in electricity distribution networks.

Keywords

Polymeric arrester, silicone rubber insulators, silicone degradation, leakage current

References

1. Wallstro, S.; Dernfalk, A. D.; Bengtsson, M.; Kro, S.; Gubanski, S. M. & Karlsson, S. - Polym. Degrad. Stabil., 88, p.400 (2005).

2. Kumagai, S. - IEEE Trans. Dielectr. Electr. Insul., 14, p.1201 (2007). http://dx.doi.org/10.1109/TDEI.2007.4339480

3. Kumagai, S. - IEEE Trans. Dielectr. Electr. Insul., 14, p.384 (2007). http://dx.doi.org/10.1109/TDEI.2007.344618

4. Haji, K.; Zhu, Y.; Otsubo, M. & Sakoda, T. - Polym. Degrad. Stabil., 93, p.2214 (2008). http://dx.doi.org/10.1016/j. polymdegradstab.2008.05.025

5. Gubanski, S. M. - IEEE Trans. Electr. Insul., 27, p.374 (1992). http:// dx.doi.org/10.1109/14.135608

6. Kumagai, S. & Yoshimura, N. - IEEE Trans. Dielectr. Electr. Insul., 8, p.673 (2001). http://dx.doi.org/10.1109/94.946722

7. Hillborgl, H. & Gedde, U. W. - IEEE Trans. Dielectr. Electr. Insul., 6, p.703 (1999).

8. Ayman, H.; El-Hag, Jayaram, S. H. & Cherney, E. A. - J. Electrost., 97, p.48 (2009).

9. Rowland, S. M.; Xiong, Y. & Robertson, J. - IEEE Trans. Dielectr. Electr. Insul., 14, p.130 (2007). http://dx.doi.org/10.1109/TDEI.2007.302881

10. Meyer, L. H.; Cherney, E. A. & Jayaram, E. A. - IEEE Elec. Insul. Mag., 20, p.13 (2004). http://dx.doi.org/10.1109/MEI.2004.1318835

11. American Society for Testing and Materials - ASTM. - “ASTM G26 - 96 - Standard Pratice for Operating Light Exposure apparatus (xenon-Arc Type) With and without water for exposure of Nonmetallic Materials”, ASTM (1996).

12. American Society for Testing and Materials - ASTM. - “ASTM B 117 - 07a Standard Practice for Operating Salt Spray (Spray) Apparatus”, ASTM (2007).

13. Ferreira, C. A.; Coser, E.; Angelini, J. M. G.; Rossi, J. A. D.; Arndt, O.; Martinez, M. L. B. & Brito, F. - ISH, p.1 (2007).

14. Boonruang, M.; Hiroyuki, S. & Ryosuke, M. - IEEE Trans. Dielectr. Electr. Insul., 13, p.129 (2006).

15. American Society for Testing and Materials - ASTM. - “ASTM D 1525 - 98 Standard Test Method for Vicat Softening Temperature of Plastics”, ASTM (1998).

16. American Society for Testing and Materials - ASTM. - “ASTM E 1252 - 98 (Reapproved 2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis”, ASTM (2007).

17. National Electrical Manufactures Association - NEMA107. - “Methods of Measurement of Radio Influence Voltage (RIV) of High Voltage Apparatus”, NEMA.

18. Yoshimura, N. & Kumagai, S. - IEEE Trans. Dielectr. Electr. Insul., 6, p.632 (1999). http://dx.doi.org/10.1109/94.798120

19. Sorqvist, T. & Vlastos, A. E. - IEEE Trans. Power Deliv., 12, p.1657 (1997). http://dx.doi.org/10.1109/61.634187
588371747f8c9d0a0c8b48e6 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections