Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/article/doi/10.4322/polimeros.2013.070
Polímeros: Ciência e Tecnologia
Review Article

Degradation of Non-vulcanized Natural Rubber – Renewable Resource for Fine Chemicals Used in Polymer Synthesis

Fainleib, Alexander; Pires, Renata V.; Lucas, Elizabete F.

Downloads: 0
Views: 499

Abstract

In the current scenario, there is growing interest in the products of degradation of rubber (natural and synthetic) for specific applications in different industry sectors, whose benefits in replacing conventionally used products are mainly related to sustainability. Since the degradation products of rubber can be used in different areas, several research groups may have the interest aroused by these products, but are not familiar with the aspects related to the chemical behavior of rubber. This review aims to bring together the key information in the published literature on the degradation of natural rubber, emphasizing metatheses reactions, oxidative damage and splitting of the double bond, in order to serve as a reference source for researchers from different fields interested in obtaining such kind of products. The structures and properties as well as additional chemical transformations resulting in oligomers of isoprene, functionalised oligomers and polymers based on both are also described.

Keywords

Degradation, depolymerization, natural rubber

References



1. Spinacé, M. A. S. & De Paoli, M. A. - Quim. Nova, 28, p.65 (2005). http://dx.doi.org/10.1590/S0100- 40422005000100014

2. Pacheco, E. B. A. V.; Ronchetti, L. M. & Masanet, E. – Resour. Conservat. Recycl., 60, p.140 (2012). http:// dx.doi.org/10.1016/j.resconrec.2011.12.010

3. Morton, M. – “Rubber Technology”, Van Nostrand Reinhold, New York (1983).

4. Roberts, A. D. - “Natural Rubber Science and Technology”, Oxford Univ. Press, Oxford, (1988).

5. Portal São Francisco - “Características da Borracha Natural”. Disponível em: . Acesso em: 06 dez. 2012.

6. Grison, E. C.; Becker, E. & Sartori, A. - “Borrachas e seus aditivos. Componentes, influências e segredos”, Suliani, Porto Alegre (2010).

7. Roland, C. M. - “Structure Characterization”, in: The Science and Technology of Rubber, cap.3, James E. Mark, Burak Erman, Frederick R. Eirich (eds.), Elsevier Academic Press, San Diego (2005). http://dx.doi.org/10.1016/B978- 012464786-2/50006-7

8. Sirqueira, A. S. & Soares, B. G. - J. Macromol. Sci. Physics, 46, p.1 (2007). http://dx.doi. org/10.1080/00222340601059035

9. Sirqueira, A. S. & Soares, B. G. - J. Appl. Polym. Sci., 103, p.2669 (2007). http://dx.doi.org/10.1002/app.25418

10. Sirqueira, A. S. & Soares, B. G. - Macromol. Mater. Eng., 292, p.62 (2007). http://dx.doi.org/10.1002/ mame.200600332

11. Sirqueira, A. S. & Soares, B. G. - Polímeros, 16, p.299 (2006). http://dx.doi.org/10.1590/S0104-14282006000400009

12. Sirqueira, A. S. & Soares, B. G. - Eur. Polym. J., 39, p.2283 (2003). http://dx.doi.org/10.1016/S0014-3057(03)00163-0

13. Sirqueira, A. S. & Soares, B. G. - J. Appl. Polym. Sci. 83, p.2892 (2002). http://dx.doi.org/10.1002/app.10283

14. Soares, B. G.; Sirqueira, A. S.; Oliveira, M. G. & Almeida, M. - Macromol. Symp., 189, p.45 (2002).

15. Jansen, P. & Soares, B. G. - Polímeros, 6, p.43 (1996).

16. Tavares, M. I. B.; Jansen, P. & Soares, B. G. - Polym. Bull., 37, p.215 (1996). http://dx.doi.org/10.1007/ BF00294124

17. Jansen, P. & Soares, B.;G. - J. Appl. Polym. Sci., 61, p.591 (1996).

18. Jansen, P. & Soares, B.G. - J. Appl. Polym. Sci., 58, p.101 (1995). http://dx.doi.org/10.1002/app.1995.070580111

19. Chatterjee, A. K. & Grubbs, R. H. - “Applications in organic synthesis”, in: Handbook of metathesis, v.2, p.246, Grubbs, R. H. (ed.), Wiley-VCH, Weinheim (2003). http:// dx.doi.org/10.1002/9783527619481.ch20

20. Alimuniar, A.; Yarmo, M. A.; Rahman, M. Z. A.; Kohjiya, S.; Ikeda, Y. & Yamashita, S. - Polym. Bull., 23, p.119 (1990). http://dx.doi.org/10.1007/BF00983973

21. Lewis, C. “to The Thailand Research Fund, The Prince OF Songkla University, AXIS IP Holding PTE LTD”, WO Patent 2009/154569 A1, Dec. 23 (2009).

22. Solanky, S. S.; Campistron, I.; Laguerre, A. & Pilard, J.- F. - Macromol. Chem. Phys., 206, p.1057 (2005). http:// dx.doi.org/10.1002/macp.200400416

23. Gutiérrez, S. & Tlenkopatchev, M. A. - Polym. Bull., 66, p.1029 (2011). http://dx.doi.org/10.1007/s00289-010- 0330-x

24. Wolf, S. & Plenio, H. - Green Chem., 13, p.2008 (2011). http://dx.doi.org/10.1039/c1gc15265c

25. Saetung, A.; Rungvichaniwat, A.; Campistron, I.; Klinpituksa, P.; Laguerre, A.; Phinyocheep, P. & Pilard, J.- F. - J. Appl. Poly. Sci., 117, p.1279 (2010). http://dx.doi. org/10.1002/app.31601

26. Phinyocheep, P.; Phetphaisit, C. W.; Derouet, D.; Campistron, I. & Brosse, J. C. - J. Appl. Polym. Sci., 95, p.6 (2005). http://dx.doi.org/10.1002/app.20812

27. Gillier-Ritoit, S.; Reyx, D.; Campistron, I.; Laguerre, A. & Singh, R. P. - J. Appl. Polym. Sci., 87, p.42 (2003). http:// dx.doi.org/10.1002/app.11661

28. Isa, S. Z.; Yahya, R.; Hassan, A. & Tahir, M. - Malaysian J. Anal. Sci., 11, p.42 (2007).

29. Ravindran, T.; Gopinathan Nayar, M. R. & Francis, D. J. - J. Appl. Polym. Sci., 35, p.1227 (1988). http://dx.doi. org/10.1002/app.1988.070350509

30. Mathew, V. S.; Sinturel, C.; George, S. C. & Thomas, S. - J. Mater. Sci., 45, p.1769 (2010). http://dx.doi.org/10.1007/ s10853-009-4154-8

31. Radhakrishnan Nair, M. N.; Thomas, G. V. & Gopinathan Nair, M. R. - Polym. Degrad. Stability., 92, p.189 (2007). http://dx.doi.org/10.1016/j.polymdegradstab.2006.11.014

32. Nor, H. M. & Ebdon, J. R. - Polymer, 41, p.2359 (2000). http://dx.doi.org/10.1016/S0032-3861(99)00417-6

33. Klinklai, W.; Kawahara, S.; Mizumo, T.; Yoshizawa, M.; Sakdapipanich, J. T.; Isono, Y. & Ohno, H. - Eur. Polym. J., 39, p.1707 (2003). http://dx.doi.org/10.1016/S0014- 3057(03)00060-0

34. Tsuchii, A.; Suzuki, T. & Takeda K. - Appl. Environm. Microbiol., 50, p.965 (1985). PMid:16346923 PMCid:PMC291777.

35. Tsuchii, A. & Takeda K. - Appl. Environm. Microbiol., 56, p.269 (1990). PMid:16348100 PMCid:PMC183308.

36. Braaz, R.; Fischer, P. & Jendrossek, D. Appl. Environm. Microbiol., 70, p.7388 (2004). PMid:15574940 PMCid:PMC535205. http://dx.doi.org/10.1128/ AEM.70.12.7388-7395.2004

37. Bode, H. B.; Kerkhoff, K. & Jendrossek, D. - Appl. Environm. Microbiol, 66, p.3680 (2000). PMid:10966376 PMCid:PMC92206. ht tp: / /dx.doi .org/10.1128/ AEM.66.9.3680-3685.2000

38. Rose, K.; Tenberge, K. B. & Steinbüchel, A. - Biomacromolecules, 6, p.180 (2004). PMid:15638519. http://dx.doi.org/10.1021/bm0496110

39. Bualek, S. - J. Sci. Soc. Thailand, 9, p.191 (1983). http:// dx.doi.org/10.2306/scienceasia1513-1874.1983.09.191

40. De, D.; Maiti, S.; Adhikari, B. - J. Appl. Polym. Sci., 73, p.2951 (1999). http://dx.doi.org/10.1002/(SICI)1097- 4628(19990929)73:14<2951::AID-APP19>3.0.CO;2-B

41. Magalhães, A. S. G. & Feitosa, J. P. A. - Polímeros, 9, p.65 (1999). http://dx.doi.org/10.1590/S0104- 14281999000400011

42. Kebir, N.; Campistron, I.; Laguerre, A.; Pilard, J. F. & Bunel, C. - J. Appl. Polym. Sci., 122, p.1677 (2011). http:// dx.doi.org/10.1002/app.34013

43. Linos, A. & Steinbüchel, A. - Kautschuk Gummi Kunststoffe, 51, p.496 (1998).

44. Shah, Z.; Shah, A. A.; Hameed, A. & Hasan, F. - J. Chem. Soc. Pak., 31, p.638 (2009).

45. Arenskötter, M.; Broeker, D. & Steinbüchel, A. - Appl. Environm. Microbiol., 70, p.3195 (2004). PMid:15184112 PMCid:PMC427784.

46. Jendrossek, D. & Reinhardt, S. - Fems Microbiol. Lett., 224, p.6165 (2003).

47. Berekaa, M. M.; Linos, A.; Reichelt, R.; Keller, U. & Steinbuchel, A. - Microbiol. Lett., 184, p.199 (2000). http:// dx.doi.org/10.1111/j.1574-6968.2000.tb09014.x

48. Rose, K. & Steinbüchel, A. - Microbiol. Lett., 211, p.129 (2002). http://dx.doi.org/10.1111/j.1574-6968.2002. tb11214.x

49. Kebir, N.; Morandi, G.; Campistron, I.; Laguerre, A. & Pilard, J.-F. - Polymer, 46, p.844 (2005).

50. Derouet, D.; Tran, Q. N. & Thuc, H. H. - Eur. Polym. J., 43, p.1806 (2007). http://dx.doi.org/10.1016/j. eurpolymj.2007.02.036

51. Kebir, N.; Campistron, I.; Laguerre, A.; Pilard, J.-F.; Bunel, C. & Couverselle, J. P. - Polymer, 46, p.6889 (2005).

52. Kebir, N.; Campistron, I.; Laguerre, A.; Pilard, J. F.; Bunel, C. & Couverselle, J. P. - Polymer, 48, p.1 (2006).

53. Kebir, N.; Campistron, I.; Laguerre, A.; Pilard, J.-F.; Bunel, C. & Jouenne, T. - Biomaterials, 28, p.4200 (2007). PMid:17610950.

54. Morandi, G.; Kebir, N.; Campistron, I.; Gofier, F.; Laguerre, A. & Pilard, J. F. - Tetrahedron Lett., 48, p.7726 (2007). http://dx.doi.org/10.1016/j.tetlet.2007.07.089

55. Mauler, R. S.; Guaragna, F. M.; Gobbi, D. L. & Samius, D. - Eur. Polym. J., 33, p.399 (1997). http://dx.doi. org/10.1016/S0014-3057(96)00148-6

56. Bafica, R. & Soares, B. G. - “Functionalization and cleavage of NR by periodic acid in THF solution”, in 7° Brazilian MRS Meeting, Guarujá (2008).

57. Bafica R. - “Diminuição do tamanho das moléculas de borracha natural por oxidação com ácido periódico e sua composição com cargas reforçantes”, Master Thesis, Universidade Federal do Rio de Janeiro, Brazil (2008).

58. Ivin, K. J. & Mol, J. C. - “Olefin metathesis and metathesis polymerization”, Academic Press, San Diego (1997). PMid:9213757.

59. Thorn-Csanyi, E. & Zilles, J. U. - J. Mol. Catal. A., 190, p.85 (2002). http://dx.doi.org/10.1016/S1381-1169(02)00220-0

60. Lapinte, V.; Fontaine, L.; Montembault, V.; Campistron, I. & Reyx, D. - J. Mol. Catql. A., 190, p.117 (2002). http:// dx.doi.org/10.1016/S1381-1169(02)00229-7

61. Gutiérrez, S.; Vargas, S. M. & Tlenkopatchev, M. A. - Polym. Degrad. Stability., 83, p.149 (2004).

62. “Catalyst Developments”, in: Handbook of metathesis, v.1, Grubbs, R. H. (ed.), Wiley-VCH, Weinheim (2003). http:// dx.doi.org/10.1002/9783527619481

63. Bielawski, C. W. & Grubbs, R. H. - Prog. Polym. Sci., 32, p.1 (2007). http://dx.doi.org/10.1016/j. progpolymsci.2006.08.006

64. Scholl, M.; Ding, S.; Lee, C. W. & R. H. Grubbs - Org. Lett., 1, p.953 (1999). PMid:10823227. http://dx.doi. org/10.1021/ol990909q

65. Leuthäußer, S.; Schwarz, D. & Plenio, H. - Chem. Eur. J., 13, p.7195 (2007). PMid:17591725. http://dx.doi. org/10.1002/chem.200700228

66. Leuthäußer, S.; Schmidts, V.; Thiele, C. M. & Plenio, H. - Chem. Eur. J., 14, p.5465 (2008). PMid:18461585. http://dx.doi.org/10.1002/chem.200800139

67. Curti, P. S.; Vidotti, G. J.; Rubira, A. F. & Muniz, E. C. - Polym. Degr. Stab., 79, p.325 (2003). http://dx.doi. org/10.1016/S0141-3910(02)00296-3

68. Kawabata, N.; Yamashita, S. & Furukawa, Y. - Bull. Chem. Soc. Japan, 51, p.625 (1978). http://dx.doi.org/10.1246/ bcsj.51.625

69. Yamashita, S.; Kato, S.; Kawabata, N. & Okamoto, T. - J. Appl. Polym. Sci., 22, p.353 (1978). http://dx.doi. org/10.1002/app.1978.070220204

70. Okwu, U. N. & Akinlabi, A. K. - J. Appl. Polym. Sci., 106, p.1291 (2007). http://dx.doi.org/10.1002/app.26560

71. Rose, K. & Steinbüchel, A. - Appl. Environm. Microbiol., 71, p.2803 (2005). PMid:15932971 PMCid:PMC1151847. http://dx.doi.org/10.1128/AEM.71.6.2803-2812.2005

72. Magioli, M.; Sirqueira, A. S. & Soares, B. G. - Polym. Testing, 29, p.840 (2010). http://dx.doi.org/10.1016/j. polymertesting.2010.07.008

73. Magioli, M.; Sirqueira, A. S. & Soares, B. G. - Polímeros, 19, p.190 (2009).

74. Naskar, A. K.; De, S. K. & Bhowmick, A. K. - J. Appl. Polym. Sci., 84, p.370 (2002). http://dx.doi.org/10.1002/ app.10348

75. Lee, S. H.; Balasubramanian, M. & Kim, J. K. - J. Appl. Polym. Sci., 106, p.3193 (2007). http://dx.doi.org/10.1002/ app.26489

76. Lee, S. H.; Zhang, Z. X.; Xu, D.; Chung, D.; Oh, G. J. & Kim, J. K. - Polym. Eng. Sci., 49, p.169 (2009).

77. Leite, L. F. M. & Soares, B. G. - Petrol. Sci. Technol., 17, p.1071 (1999). http://dx.doi. org/10.1080/10916469908949766

78. Fainleib, A.; Grigoryeva, O.; Youssef, B. & Saiter, J. M. - “Utilization of tire rubber and recycled polyolefins into thermoplastic elastomers”, in: Recent developments in polymer recycling, cap. 1, A. Fainleib and O. Grigoryeva (eds.), Transword Research Network, Kerala (2011).

79. Abraham, E.; Cherian, B. M.; Pothen, L. A.; Thomas, S. & Kottaisamy, M. - “Recent advances in the recycling of rubber waste”, in: Recent developments in polymer recycling, cap. 2, A. Fainleib and O. Grigoryeva (eds.), Transword Research Network, Kerala (2011).

80. Adhikari, B.; De, D. & Maiti, S. - Prog. Polym. Sci., 25, p.909 (2000). http://dx.doi.org/10.1016/S0079- 6700(00)00020-4

81. Nevatia, P.; Banerjee, T. S.; Dutta, B.; Jha, A.; Naskar, A. K. & Bhowmick, A. K. - J. Appl. Polym. Sci., 83, p.2035 (2002). http://dx.doi.org/10.1002/app.10115

82. Grigoryeva, O.; Fainleib, A.; Starostenko, O.; Danilenko, I.; Kozak, N. & Dudarenko, G. - Rubber Chem. Technol., 77, p.131 (2004). http://dx.doi.org/10.5254/1.3547806

83. Grigoryeva, O. P.; Tolstov, A. M.; Fainleib, A. L. & Starostenko, O. N. - Nonlinear Optics Quantum Optics, 31, p.185 (2004).

84. Grigoryeva, O.; Fainleib, A.; Tolstov, A.; Starostenko, O.; Lievana, E. & Karger-Kocsis, J. -J. Appl. Polym. Sci., 95, p.659 (2005). http://dx.doi.org/10.1002/app.21177

85. Grigoryeva, O.; Fainleib, A.; Tolstov, A.; Pissis, P.; Spanoudaki, A.; Vatalis, A. & Delides, C. - J. Them. Anal. Calorim., 86, p.229 (2006). http://dx.doi.org/10.1007/ s10973-005-7189-3

86. Grigoryeva, O.; Fainleib, A.; Grenet, J. & Saiter, J.- M. - Rubber Chem. Technol., 81, p.737 (2008). http:// dx.doi.org/10.5254/1.3548229

87. Fainleib, A.; Grigoryeva, O. & Martínez-Barrera, G. - “Radiation induced functionalization of polyethylene and ground tire rubber for their reactive compatibilization in thermoplastic elastomers”, in: Gamma Radiation Effects on Polymeric Materials and its Applications, p. 63, C. E. Barrera-Diaz, and G. Martinez-Barrera (eds.), Research Signpost, Kerala (2009).

88. Egharevba, O.; Okieimen, F. E.; Okwu, U. N. & Malomo, D. - Mater. Sci. Appl., 2, p.196 (2011).
588371977f8c9d0a0c8b498c polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections