Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/article/doi/10.1590/S0104-14282000000200010
Polímeros: Ciência e Tecnologia
Short Communication

Propriedades Mecânicas e Morfologia de uma Blenda Polimérica de PP/HIPS Compatibilizada com SEBS

Mechanical Properties and Morphology of a PP/HIPS Polymer Blend Compatibilized with SEBS

Melo, Tomás J. A. de; Carvalho, Laura H. de; Calumby, Ricardo B.; Brito, Keila G. Q.; D'Almeida, José R. M.; Spieth, Ernest

Downloads: 0
Views: 1140

Resumo

Neste trabalho o efeito da adição de 2 a 7% em peso de um copolímero tribloco estireno-b-etilenoco- butileno-b-estireno (SEBS) em uma blenda polipropileno/poliestireno de alto impacto (PP/HIPS) 70:30 foi determinado. As propriedades em tração e impacto, temperatura de amolecimento Vicat e morfologia da blenda PP/HIPS (70:30) em função da concentração de SEBS foram determinadas. As blendas foram processadas em extrusora dupla-rosca contra-rotativa interpenetrante e as amostras moldadas por compressão. Os resultados mostraram que, embora a adição do SEBS tenha promovido um aumento muito leve na resistência tênsil e no módulo elástico, observou-se um expressivo aumento no alongamento na ruptura e na resistência ao impacto das blendas; a temperatura Vicat das blendas foi superior à do HIPS e que a adição do SEBS promoveu uma redução significativa do tamanho de partícula, indicando que o SEBS exerceu um efeito emulsificante e estabilizador na morfologia das blendas investigadas. Resultados otimizados foram obtidos para a composição contendo 5% de SEBS, o que foi atribuido à uma maior compatibilidade entre as fases.

Palavras-chave

Blenda polimérica, compatibilizante, polipropileno, poliestireno de alto impacto, SEBS, HIPS

Abstract

In this work the effect of a 2-7% w/w styrene-b-ethylene-co-butylene-b-styrene triblock copolymer (SEBS) addition on the properties of a 70:30 polypropylene/high impact polystyrene (PP/HIPS) polymer blend was investigated. Tensile and impact properties, the Vicat temperature and blend morphology were determined as a function of SEBS content. Processing was carried out in a twin-screw intermeshing counter-rotating extruder and the samples were compression moulded. Our results indicate that the SEBS addition, albeit promoting very slight increases on tensile strenght and modulus, led to increases on the elongation at break and impact strenght of the blends, and the Vicat temperature of the blends was higher than that of HIPS. The SEM analysis showed that SEBS addition promotes a significant reduction on particle size, which was taken as an indication that SEBS exerted an emulsifying and stabilizing effect on the morphology of the PP/HIPS blend under investigation. The best overall properties were obtained at 5 wt.% SEBS content.

Keywords

Polymer blend, compatibiliser, polypropylene, high impact polystyrene, SEBS, HIPS.

References



1. Okamoto, K.T.; Denicola, A. J.; Huang, M.C.T. & Cleuvenbergen, M.V. ¾ "A Synergistic Impact Modifier Combination for Polypropylene/Polystyrene Alloys", in: ANTEC'93, p. 2103-2106 (1993).

2. Melo, T. J. A. ; Brito, K. G. Q. & Carvalho, L. H. ¾ "Effects of Mixing Conditions, Composition and Compatibilizing Agent on Mechanical Properties of PP/HIPS Blends", in: VII International Macromolecular Colloquium, Gramado-RS, set (1996).

3. Fortelny, I.; Michalkova, D. & Mikesova, J. ¾ J. Appl. Polym. Sci., 59, p.155-164 (1996).

4. Matos, M.E.; Rosales, C.; Muller, A. J. & Favis, B.D. ¾"Polystyrene / Polypropylene Blends: Morphology / Interphase Relationship, Rheological and Calorimetric Behavior", in: ANTEC'97, p.1-6 (1997).

5. Catálogo Técnico de Borrachas Termoplásticas KRATON® - Shell Química Corporation.

6. Han C. D. "Rheology in Polymer Processing" ¾ Academic Press Inc., New York, (1976).

7. Utracki, L. A . ¾ "Polymer Alloys and Blends: Thermodynamics and Rheology", Hanser Publi., New York, (1989).

8. Paul, D.R. & Newman, S. ¾ "Polymer Blends", Vols. 1 e 2, Academic Press, New York (1981).

9. Folkes, M.J. & Hope, P.S. ¾ "Polymer Blends and Alloys", Blackie Academic & Professional, Glasgow (1995).

10. Plochocki, A. P.; Dagli, S. S. & Andrews, R. D. ¾ Polym. Eng. & Sci., 30, p.741-752 (1990).

11. Gupta, A. K. & Purwar, S. N. ¾ J. Appl. Polym. Sci., 29, p. 1079-1093 (1984).

12. Gupta, A. K. & Purwar, S. N. ¾ J. Appl. Polym. Sci., 30, p. 1777-11798 (1985).

13. Srinivasan, K.R. & Gupta, A. K. ¾ J. Appl. Polym. Sci., 53, p. 1-17 (1994).

14. Castro, J.L.D. ¾ "Comportamento Reológico e Mecânico do Sistema PP/ SEBS/ PEBD", Dissertação de Mestrado, UFSCar, Brasil (1995).

15. Gupta, A. K. & Purwar, S. N. ¾ J. Appl. Polym. Sci., 30, p. 1799 -1814 (1985).

16. Calumby, R.B.R.; Melo, T.J.A. ; Brito, K.G.Q.; Carvalho, L.H. & Spieth, E. ¾ " The Influence of a SEBS Copolymer as a Compatibiliser for a PP/HIPS Blend" , in: Simposio Argentino de Polimeros, p. 92-93, Bahia Blanca ¾Argentina, nov (1997).

17. Calumby, R.B.R.; Melo, T.J.A. ; Brito, K.G.Q.; Carvalho, L.H. & Spieth, E. ¾ "Uso de um Copolímero Tribloco na Compatibilização da Blenda SUPLEN/HIPS", in: Anais do 4º Congresso Brasileiro de Polímeros, Salvador ¾ BA, set/out (1997).

18. Yang, L.Y; Smith, T.G. & Bigio ¾ "Melt Blending of Linear Low Density Polyethylene and Polystyrene ¾ Effects of Processing Conditions, Composition, and Compatibilizers upon Morphology Development", in: ANTEC'94, p. 2428-2432 (1994).

19. Bucknall, C.B. ¾ "Toughened Plastics" Applied Science Publishers, London (1977).

20. Lindsey, C. R.; Paul, D.R. & Barlow J.W. - J. Appl. Polym. Sci, 26, p.1-8 (1981).

21. Park, C.P. & Cklingerman, G. P. ¾ " Compatibilizing PE-PS Blends with Ethylene-Styrene Copolymers", in: Plastics Engineering , p.97-99, mar (1997).

22. Nielsen, L.E.- "Mechanical Properties of Polymers and Composites", Vol. 2, p. 347-348, Marcel Dekker, Inc., New York (1974).

23. Bourry, D & Favis, B. D. ¾ Polymer, 39, p.1851- 1856 (1998).

24. Favis, B.D. ¾ J. Appl. Polym. Sci., 39, p.285-300 (1990).

25. Bordereau, V.; Shi, Z. H.; Utracki, L.A . Sammut, P. & Carrega, M. ¾ Polym. Eng. & Sci., 32, p.1846-1856 (1992).

26. Sundararaj, U. & Macosko, C. W. ¾ Polym. Eng. & Sci., 32, p.1814-1823 (1992).

588370db7f8c9d0a0c8b45e3 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections