Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/doi/10.4322/polimeros.2013.036?lang=en
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Avaliação do Efeito Pró-Oxidante no PP, em Blendas com PHB

EVALUATION OF THE EFFECT OF PRO-DEGRADING ADDITIVES IN PP, BLENDED WITH PHB

Santos, Paulo A.; Oliveira, Marina N.; Paoli, Marco A. de; Freitas, Vanessa G.

Downloads: 1
Views: 1355

Resumo

O interesse por polímeros biodegradáveis tem aumentado muito devido ao baixo impacto ambiental dos mesmos. No entanto, muitos desses produtos disponíveis no mercado são frágeis, difíceis de processar e tem alto custo. Uma das técnicas para superar essas deficiências é através de blenda com outros polímeros. Este trabalho avaliou várias composições de blenda PHB / PP, utilizando-se um aditivo pró-degradante deste último, de forma a tornar a formulação oxibiodegradável em solo simulado (ASTM D6003). O comportamento mecânico, térmico e químico de corpos de prova de tração das amostras enterradas foi acompanhado através de medidas de resistência à tração, DSC, FTIR, GPC e SEM. Parte das amostras foi envelhecida em estufa a 90 ºC por 10 dias, de forma a acelerar a oxidação do PP pelo aditivo. A blenda composta por 56 wt% de PP / 40 wt% de PHB / 3 wt% de GMA / 1 wt% de MnSt foi a mais susceptível à oxibiodegradação, tendo reduzido depois de 180 dias de enterramento em solo, a tensão de tração em 40%, alongamento na ruptura em 46% e a massa em 24%. Estes valores foram superiores ao próprio PHB puro e o efeito sinérgico ocorrido nestas blendas foi atribuído à aceleração da degradação do PHB pelo PP oxidado.

Palavras-chave

poli-β-(hidroxibutirato), polipropileno, blenda, oxibiodegradação, injeção

Abstract

The interest in the use of biodegradable polymers has increased because of their environmental advantages. Blending them with other polymers is one of the techniques currently employed to overcome their brittleness, poor processing and cost. This work evaluated different blend compositions of PHB / PP, using a pro-degrading additive for this latter, to make the formulation prone to oxo-biodegradability in simulated soil (ASTM D6003). The mechanical, thermal and chemical behavior of buried injection molded tensile bars was monitored through measurements of tensile strength, DSC, FTIR, GPC and SEM. Part of the samples was oven aged at 90 ºC for 10 days in order to accelerate the PP oxidation by the additive. The blend made of 56 wt% of PP / 40 wt% of PHB / 3 wt% of GMA / 1 wt% of MnSt was the most susceptible to oxo-biodegradation, having reduced after 180 days of burring in soil, its tensile stress by 40%, tensile elongation by 46% and mass by 24%. These values were even higher than the ones for the pure PHB. This synergic effect was attributed to the acceleration of PHB degradation by the oxidized PP.

Keywords

poly-β-(hydroxybutyrate), polypropylene, blend, oxo-biodegradation, injection molding.

References

1. Anuário da ABIPLAST, 2010, www.abiplast.com.br consultada em 10/6/2011

2. K. Sudesh; H. Abe; T. Doi Prog. in Polym. Sci. 2000, 25, 1503-155.

3. G. Scott; J. Lemaire; I. Jakubowicz; T. Ojeda; P. Hebbar; OPA Responds to attack from Hydro-bio Industry; Ox.biodeg. Plastics Association; Disponível em . acesso: 18/08/2010.

4. S. M. Martelli; E. G. Fernandes; E. Chiellini; J. Therm. Anal. Calorim. 2009, 97, 853–858

5. F. Khabbaz; A.C. J. Albertsson J. Appl. Polym. Sci. 2001, 79, 2309-2316.

6. N.C. Billingham; E. Chiellini; A. Corti; R. Baciu; D. Wiles, Environmentally degradable plastics based on oxo-biodegradation of conventional polyolefins, In: Chiellini, E; Solaro, R. Plenum Publisher; New York, Biodegrad polym. and Plastics, 2003, 313-326.

7. A. Ammala; S. Bateman; K. Dean; E. Petinakis; P. Sangwan; S. Wong; Q. Yuan; Long; Yu; C. Patrick; K.H. Leong Prog. Polym. Sci., 2011, 36, 1015-1049.

8. American Society for Testing and Materials, Philadelphia. Determining Weight Loss From Plastic Materials Exposed to Simulated Municipal Solid-Waste (MSW) Aerobic Compost Environment: ASTM D 6003-96, Annual Book of ASTM Standards, 09.04, 1996.

9. Y. Aoyagi; K. Yamashita; Y. Doi Polym. Degrad. Stab. 2002, 76, 53-59.

10. R. Sadi; G. J. M. Fechine; N. R. Demarquette in Optimal Processing PP/PHB Blends. In: 23rd Polym Proces Society Meeting, 2007, Salvador.

11. A.de Campos; J.C. Marconato; S.M.M. Franchetti; Polímeros, 2010, 20, 295-300.

12. S. P. C. Gonçalves; D. L. Chinaglia; S. M. J. Martins-Franchetti; J. Polym. Environ. 2009, 17, 280-285.

13. M. Vanin; C.C. Santana; I. L. Torriani; T. Privelic; E. A. R. Duek; Polímeros. 2004, 14, 187-193.

14. R. K. Sadi; G. J. M. Fechine; N. R. Demarquette; Macro2010 - 43rd IUPAC World Polymer Congress, Glasgow, UK.

15. N. Lucas; C. Bienaime; C. Belloy; M. Queneudec; F. Silvestre; J. E. Nava- Saucedo; Chemo. 2008, 73, 429

16. D.S. Rosa; D. Grillo; M.A.G.Bardi; M.R. Calil; C.G.F. Guedes, E.C. Ramires; E. Frollini Polym. Testing 2009, 28, 836–842.

17. W. M. Pachekoski; J. A. M. Agnelli; L. P. Belem; Mat. Research 2009, 12, 159- 164.

18. Y.H. Naa; Y. Hea; T. Nishiwakia; Y. Inagawaa; Y. Osanaib; S. Matsumurab; T. Saitoc; Y. Doid; Y. Inouea; Polym. Degrad. Stab. 2003, 79, 535–545.

5883718b7f8c9d0a0c8b4951 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections