Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/doi/10.1590/S0104-14282012005000013?lang=en
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Estudo do Efeito do Tipo de Polipropileno na Fotodegradação da Blenda Polipropileno/Poliestireno de Alto Impacto

Influence of the Type of Polypropylene on the Photodegradation of Blends of Polypropylene/High Impact Polystyrene

Fechine, Guilhermino J. M.; Demarquette, Nicole R.; Freitas, Cássia A. de; Fernandes, Laércio L.

Downloads: 0
Views: 1029

Resumo

Este trabalho visa avaliar a influência do tipo de polipropileno no comportamento da blenda polipropileno/poliestireno de alto impacto (PP/HIPS) quando exposta à radiação UV. Foram usados uma resina virgem de PP (PPv) e outra reprocessada (PPrep). Inicialmente, avaliou-se o comportamento individual dos componentes da blenda, HIPS, PPv e PPrep, quando submetidos à radiação UV por até 15 semanas de exposição. As técnicas de caracterização utilizadas para monitorar o desempenho tanto das resinas individualmente quanto das blendas submetidas à radiação UV foram: propriedades mecânicas (tração e impacto), medidas de índice de fluidez (MFI), análise térmica (DSC), espectroscopia no infravermelho (FTIR) e microscopia eletrônica de varredura (MEV). A partir dos resultados com essas técnicas verificou-se que o PPv foi a resina mais afetada pela radiação e consequentemente as blendas preparadas com esse PP também foram mais sensíveis à fotodegradação do que as demais. Em termos de fotoestabilização este resultado mostra-se interessante, já que as blendas PP/HIPS preparadas com uma resina previamente degradada necessitariam de menores teores de aditivos do que esse mesmo tipo de blenda preparada com resina virgem.

Palavras-chave

Polipropileno, poliestireno de alto impacto, blenda, fotodegradação

Abstract

The influence from the type of polypropylene on the photodegradation resistance of blends of polypropylene/high impact polystyrene (PP/HIPS) was studied. A virgin polypropylene (PPv) and another sample that suffered prior thermo-mechanical degradation (PPrep) were used. All materials, components of the blends and blends were exposed to UV radiation for up to 15 weeks. They were characterized as a function of time of UV exposure using differential scanning calorimetry (DSC), infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The mechanical (tensile and impact) properties and melt flow indexes of the materials were also evaluated. The experimental results revealed that PPv resin and its blends were more sensitive to UV radiation than PPrep and its blends. In terms of photostabilization this finding is very interesting, since PP/HIPS blends prepared with a previously degraded polyolefin would require smaller amounts of additives than the same kind of blends prepared with virgin resin.

Keywords

Polypropylene, high impact polystyrene, blend, photodegradation

References

1. Rabek, J. F. - “Polymer Photodegradation”, Chapman & Hall, London (1995).

2. Fechine, G. J. M. - “Fotodegradação e Fotoestabilização do Poli(tereftalato de etileno)”, Tese de Doutorado, Universidade Federal de Pernambuco, Brasil (2001).

3. Rabello, M. S. & White, J. R. - Plast. Rubber Compos., 25, p.237 (1996).

4. Shyichuk, A. V.; Turton, A. T.; White, J. R. & Syrotynska, I. D. – Polym. Degrad. Stab., 86, p.377 (2004).

5. Gasa, J. V.; Liu, Z & Shaw, M. T. - Polym. Degrad. Stab., 87, p.77 (2005).

6. Real, L. P.; Gardette, J. L. & Rocha, A. P. - Polym. Degrad. Stab., 88, p.357 (2005).

7. Fechine, G. J. M. & Rabello, M. S. - “Sensibilidade de poliolefinas ao envelhecimento natural”, in: Anais do 13º Cbecimat, p.3635, Curitiba - PR (1998).

8. Fechine, G. J. M.; Souto-Maior, R. M. & Rabello, M. S. - Polym. Degrad. Stab., 75, p.153 (2002).

9. Fechine, G. J. M.; Catalani, L. H. C. & Rabello, M. S. - Polymer, 45, p.2303 (2004).

10. Rabello, M. S. & White, J. R. - Polym. Degrad. Stab., 56, p.55 (1997).

11. Torikai, A.; Shirakawa, H.; Nagaya, S. & Fueki, K. - J. Appl. Polym. Sci., 40, p.1637 (1990).

12. Tavares, A. C.; Gulmine, J. V.; Lepienski, C. M. & Akcelrud, L. - Polym. Degrad. Stab., 79, p.385 (2003).

13. Pankansen, S.; Kuczynski, J. & Thomas, J. k. - Macromolecules, 27, p.3773 (1994).

14. Tjandraatmadja, G. F.; Burn, L. S. & Jollands, M. C. - Polym. Degrad. Stab., 78, p.435 (2002).

15. Torikai, A.; Sekigawa, Y. & Fueki, K. - Polym. Degrad. Stab., 21, p.43 (1988).

16. Kaczmarek, H.; Kowalonek, J.; Klusek, Z.; Pirzgalski, S. & Datta, S. - J. Polym. Sci. Part B, Polym. Phys., 42, p.585 (2004).

17. Kaczmarek, H.; Podgórski, A. & Bajer, K. - J. Photochem. Photobiol., A, Chem., 171, p.191 (2004).

18. Waldman, W, R. & De Paoli, M. A. - Polym. Degrad. Stab., 93, p.273 (2008).

19. Mustafa, S. J.; Azlan, M. R.; Fuad, M. Y. A.; Isshak, Z. A. M. & Ishiaku, U. S. - J. Appl. Polym. Sci., 82, p.428 (2001).

20. De Melo, T. J. A; Carvalho, L. H.; Calumby, R. B.; Brito, K. G. Q.; D´Almeida, J. R. M. & Spieth, E. - Polímeros, 10, p.82 (2000).

21. Fernandes, L. L.; Freitas, C. A.; Demarquette, D. R. & Fechine, G. J. M - J. Appl. Polym. Sci., in press (2010).

22. Fechine, G. J. M. & Demarquette, N. R. – Polym. Eng. Sci., 48, p.365 (2008).

23. Ghaffar, A.; Scott, A. & Scott, G. - Eur. Polym. J., 13, p.89 (1977).

24. Ghaffar, A.; Scott, A. & Scott, G. - Eur. Polym. J., 13, p.83 (1977).

25. Ghaffar, A.; Scott, A. & Scott, G. - Eur. Polym. J., 12, p.615 (1976).

26. Ghaffar, A.; Scott, A. & Scott, G. - Eur. Polym. J., 11, p.271 (1975).

27. Rabello, M. S. & White. J. R. - Polímeros, 7, p.47 (1997).
588371767f8c9d0a0c8b48f0 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections