Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/doi/10.1590/S0104-14282011005000045?lang=en
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Preparação e Caracterização de Membranas Poliméricas a partir da Blenda Polisulfona/Poliuretano

Preparation and Characterization of Polymeric Membranes from Blended Polysulfone/Polyurethane

Bellincanta, Tatiane; Poletto, Patrícia; Thürmer, Mônica B.; Duarte, Jocelei; Toscan, Andréia; Zeni, Mara

Downloads: 0
Views: 989

Resumo

Membranas de polisulfona/poliuretano foram preparadas pelo método de inversão de fases. As membranas preparadas com a adição de fotoiniciador foram irradiadas com lâmpada ultravioleta para aumentar a interação entre os polímeros e o suporte de poliéster utilizado. As membranas com e sem adição de fotoiniciador foram caracterizadas através dos testes de resistência química, capacidade de adsorção de água, determinação de densidade, porosidade, morfologia e fluxo permeado de água. A membrana fotoiniciada apresentou poros com paredes bem definidas e maior estabilidade nos testes de resistência química e fluxo permeado. Ambas as membranas apresentaram valores aproximados na adsorção de água e porosidade.

Palavras-chave

Membranas poliméricas, poliuretano, polisulfona, inversão de fase

Abstract

Polysulfone/polyurethane membranes were prepared by the phase inversion method and irradiated with an ultraviolet light bulb to increase the interaction between polymers and the polyester support. The membranes with and without addition of fotoinitiator were characterized using tests of chemical resistance, water adsorption capacity, density and porosity determination, water permeate flux and membrane morphology. The membrane treated with the fotoinitiator exhibited well defined pores and greater stability in the tests of chemical resistance and water permeate flux. Both membranes had similar values for the water adsorption and porosity.

Keywords

Polymeric membranes, poly(urethane), poly(sulfone), inversion phase

References



1. Young, T. H.; Huang, J. H. & Chuang, W. Y. - Eur. Polym. J., 38, p.63 (2002).

2. Scott K. – “Handbook of industrial membranes”, Elsevier Advanced Tecnology, Oxford,USA (1995).

3. Rahimpour, A.; Madaeni, S. S.; Amirinejad, M.; Mansourpanah, Y. & Zereshki, S. - J. Membr. Sci., 330, p.189 (2009).

4. Barzin, J. & Sadatnia, B. - J. Membr. Sci., 325, p.92 (2008).

5. Carvalho, R. B.; Borges, C. P. & Nóbrega, R. - Polímeros, 11, p.65 (2001).

6. Zhifeng, F.; Wang, Z.; Sun, N.; Wang, J. & Wang, S. - J. Membr. Sci., 320, p.363 (2008).

7. Malaisamy, R. - J. Colloid Interf. Sci., 254, p.129 (2002).

8. Stropnik, C.; Kaiser V. - Desalination, 145, p.1 (2002).

9. Habert, A. C.; Borges, C. P. & Nobrega, R. – “Processos de separação com membranas”, E-papers, Rio de Janeiro (2006).

10. Zeni, M.; Bellobono, I. R.; Muffato, F.; Polissi, A. & Selli, E. - J. Membr. Sci., 36, p.277 (1988).

11. Chakrabarty, B.; Ghoshal, A. K. & Purkait, M. K. - J. Membr. Sci., 309, p.209 (2008).

12. American Society for Testing and Materials – “ASTM D792-08, Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement”, American Standart Methods (2008).

13. Wang, X.; Zhang, L.; Sun, D. A. Q. & Chen, H. - Desalination, 236, p.170 (2009).

14. Chakrabarty, B.; Ghoshal, A. K. & Purkait, M. K. - J. Membr. Sci., 315, p.36 (2008).

15. Brandrup, J. & Immergut, E. H. – “Polymer Handbook”, Jhon Wiley and Sons, New York, USA (1989).

16. Mulder, M. – “Basic principles of membrane technology”, 2. ed., Dordrecht, NL, Kluwer Academic Publishers, USA (1996).
5883716d7f8c9d0a0c8b48c8 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections