Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/doi/10.1590/S0104-14282011005000022
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Investigação da Cinética de Cura por Calorimetria Diferencial Exploratória (DSC) de Resinas Epóxi Preparadas a partir de Óleo de Soja Epoxidado com Diferentes Anidridos e Aminas Terciárias

Investigation of the Kinetics of Cure by Differential Scanning Calorimetry (DSC) of Epoxy Resins Prepared from Epoxidized Soybean Oil with Different Anhydrides and Tertiary Amines

Costa, Ana P. O.; Gerbase, Annelise E.; Petzhold, Cesar L.

Downloads: 1
Views: 1023

Resumo

No presente trabalho, utilizou-se a calorimetria diferencial exploratória (DSC) para investigar a cinética da reação de cura de resinas epóxi produzidas a partir da reação do óleo de soja epoxidado (ESO), com os anidridos dodecenilsuccínico (DDS), maleico (MAL), ftálico (FTA), succínico (SUC) e hexahidroftálico (CH), atuando como agentes de cura, e na presença de aminas terciárias como a trietilamina (TEA), a N,N’-dimetilanilina (ARO) e a 1,4- diazobiciclo[2,2,2]octano (DABCO), atuando como catalisadores. A taxa de aquecimento, a natureza química e a estrutura do anidrido e das aminas influenciaram a reação de cura. Os métodos dinâmicos de Kissinger, Ozawa e de Barrett foram utilizados para calcular a energia de ativação dos sistemas onde se variou o anidrido. Observou‑se que os anidridos mais reativos foram o DDS e maleico que apresentaram os menores valores de energias de ativação. No estudo da influência do catalisador, utilizou-se o método de Barrett para determinar as energias de ativação das reações com as diferentes aminas. A amina cicloaliafática (DABCO) foi a mais reativa obtendo-se o menor valor de energia de ativação (Ea = 51 kJ.mol–1) e fator préexponencial (ln A0 = 9 s–1).

Palavras-chave

DSC, óleo de soja epoxidado, resina epóxi, estudo cinético

Abstract

In the present work, differential scanning calorimetry (DSC) was used to investigate the curing reaction kinetics of epoxy resins produced from reaction of epoxidized soybean oil (ESO) with cyclic anhydrides dodecenylsuccinic (DDS), maleic (MAL), phthalic (PA), succinic (SUC) and hexahydrophthalic (CH), in the presence of tertiary amines such as triethylamine (TEA), N,N-dimethylaniline (ARO) and 1,4-diazabicyclo[2,2,2]octane (DABCO). The heating rate, the nature and structure of anhydrides and amines were found to affect the curing reaction. The dynamic methods of Kissinger, Ozawa and Barrett were used to calculate the activation energy of the reactions where different anhydrides were used. DDS and maleic anhydrides were more reactive than the others. In studying the influence from the catalyst, we used the Barret’s method to determine the activation energy of the reactions. The 1,4-diazabicyclo[2,2,2]octane amine (DABCO) was the most reactive, showing the lowest activation energy (Ea= 51 kJ.mol–1) and pre-exponential factor (ln A0 = 9 s–1).

Keywords

DSC, epoxidized soybean oil, epoxy resin, kinetic study

References

1. Plazek, D. J. & Choy, I. - J. Polym. Sci: Part B: Polym. Phys., 24, p.1303 (1986).

2. Shim, J. S.; Lee, W. & Jang, J. - Polym. Bull., 25, p.669 (1991).

3. Banks, L. & Ellis, B. - Polymer, 23, p.1466 (1982).

4. Xiao, F.; Sun, Y.; Xiu, Y. H.; Wong, C. P. - J. Appl. Polym. Sci., 104, p.2113 (2007).

5. Park, S.-J.; Jin, F.-L. & Lee, J.-R. - Mater. Sci. Eng., A374, p.109 (2004).

6. Zengshe, L.; Erhan, S. Z.; Akoh, C. C. & Barton, F. E. - J. Agric. Food Chem., 54, p.2134 (2006).

7. Güner, F. S.; Yagci, Y. & Erciyes, A. T. - Prog. Polym. Sci., 31, p.633 (2006).

8. Zhou, J.; Chandrashekhara, K.; Flaningan, V. & Kapila, S. - J. Appl. Polym. Sci., 91, p.3513 (2004).

9. Boquillon, N. & Fringant, C. - Polymer, 41, p.8603 (2000).

10. Gerbase, A. E.; Petzhold, C. L. & Costa, A. P. O. - J. Am. Oil. Chem. Soc., 79, p.797 (2002).

11. Rosu, D.; Mustata, F. & Cascaval, C. N. - Thermochim. Acta, 370, p.105 (2001).

12. Kim, S. & Lu, M. - J. Appl. Polym. Sci., 71, p.2401 (1999).

13. Boey, F. Y. C. & Qiang, W. - Polymer, 41, p.2081 (2000).

14. Andrade, H. P. C.; Diniz, M. F.; Azevedo, M. F. P.; Cassu, S. N.; Lourenço, V. L. & Dutra, R. C. L. - Polímeros,18, p.359 (2008).

15. Borchardt, H. J. & Daniels, F. J. - Am. Chem. Soc., 79, p.41 (1956).

16. Kissinger, H. E. - Anal. Chem., 29, p.17 (1957).

17. Ozawa, T. - J. Therm. Anal. Calorim., 2, p.301 (1970).

18. Barrett, K. E. J. - J. Appl. Polym. Sci., 11, p.1617 (1967).

19. Lee, S.-H.; Jang, J. & Oh, J. H. - Polymer, 42, p.8339 (2001).

20. Maity, T.; Samanta, B. C.; Dalai, S. & Banthia, A. K. - Mater. Sci. Eng. A, 464, p.38 (2007).

21. Mustata, F. & Bicu, I. - J. Opt. Adv. Mater., 9, p.931 (2007).

22. Parzuchowski, P. G.; Jurczyk-Kowalska, M.; Ryskowska, J. & Rokicki, G. - J. Appl. Polym. Sci.,102, p.2904 (2006).

23. Czub, P. - Macromol. Symp., 242, p.60, (2006).

24. Jin, F-L. & Park, S-J. - Polym. Int., 57, p.577 (2008).

25. Shabeer, A.; Garg, A.; Sundararaman, S.; Chandrashekhara, K.; Flanigan, V. & Kapila, S. - J. Appl. Polym. Sci., 98, p.1772 (2005).

26. Miranda, M. I. G.; Bica, C. I. D.; Samios, D. & Tomedi, C. - Polymer, 38, p.1017 (1997).

27. Costa, M. L.; Botelho, E. C.; Paiva, J. M. F. & Rezende, M. C. – Mater. Res., 8, p.317 (2005).

28. Gonis, J.; Simon, G. P. & Cook, W. D. - J. Appl. Polym. Sci., 72, p.1479 (1999).

29. Patel, R. D.; Patel, R. G. & Patel, V. S. - Angew. Makrom. Chem., 155, p.57 (1987).

30. Matejka, L.; Lövy, J.; Pokornÿ, S.; Bouchal, K. and Dusek, K. - J. Polym. Sci.: Part A: Polym. Chem., 21, p.2873 (1983).

31. Mark, H. F.; Bikales, N.; Overberger, C. G.; Menges, G. & Kroschwitz, I. J. “Emulsion polymerization to fibers” in: Manufacture encyclopedia of polymer science and engineering, John - Wiley, New York (1986).
5883716a7f8c9d0a0c8b48bb polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections