Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/doi/10.1590/S0104-14282011005000009?lang=en
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Estudo da Reação entre polietileno glicol e resina epoxídica na Presença de n,n-dimetilbenzilamina

Study of the Reaction Between Polyethylene Glycol and Epoxy Resins Using N,N-dimethylbenzylamine as Catalyst

Zacharuk, Mario; Becker, Daniela; Coelho, Luiz Antonio F.; Pezzin, Sérgio H.

Downloads: 0
Views: 1073

Resumo

Neste trabalho foi estudada a reação entre polietileno glicol (PEG) e uma resina epoxídica à base de diglicidil éter de bisfenol A (DGEBA), na presença de N,N-dimetilbenzilamina (DMBA), sendo os produtos desta reação avaliados por espectroscopia no infravermelho (FTIR), espectroscopia de ressonância magnética nuclear de próton (RMN-1H) e medidas de viscosidade cone-prato. Amostras curadas com um endurecedor à base de poliamina foram também submetidas a ensaios de tração e calorimetria exploratória diferencial (DSC). Os resultados das análises de viscosidade, FTIR e RMN (1H) confirmaram a ocorrência da reação entre grupos epóxi do DGEBA e grupos hidroxila do PEG na presença de DMBA, a 100 °C. As análises de DSC e os ensaios de tração dos sistemas curados mostram que a reação de DGEBA com PEG gera um material com temperatura de transição vítrea (Tg) significativamente menor, em conjunto com o aumento da deformação na ruptura e decréscimo do modulo de elasticidade, quando comparados ao sistema epoxídico de referência (DGEBA).

Palavras-chave

DGEBA, polietileno glicol, DMBA, propriedades mecânicas

Abstract

In this work the reaction of polyethylene glycol (PEG) and epoxy resin (BADGE) in the presence of N,N-dimethylbenzylamine (DMBA) was studied. The reaction products were evaluated by infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR) and viscosity measurements. Samples cured with a polyamine-based hardener were also submitted to tensile tests and differential scanning calorimetry (DSC). The results of the viscosity analyses, FTIR and RMN (1H) confirmed the reaction between DGEBA epoxy groups and PEG hydroxyl groups in the presence of DMBA, at 100 °C. DSC analyses and tensile tests of cured systems showed that the reaction of DGEBA with PEG leads to a reduction of Tg, generating a more flexible material.

Keywords

BADGE, polyethylene glycol, DMBA, mechanical properties

References

1. Chen, H.; Jacobs, O.; Wu, W.; Rudiger, G. & Schadel, B. – Polym. Test., 26, p.351 (2007).

2. Thomas, R.; Durix, S.; Sinture, C.; Omonov, T.; Goossens, S.; Groeninckx, G.; Moldenaers, P. & Thomas, S. - Polymer, 48, p.1695 (2007).

3. Brydson, J. - “Plastics materials”, Butterworths, London (1999).

4. Ooi, S. K.; Cook, W. D.; Simin, G. P. & Such, C. H. - Polymer, 41, p.3639 (2000).

5. McGarry, F. J. & Arends, C. B. - “Polymer toughening”, Marcel Dekker, New York (1996).

6. Gojny, F. H.; Wichmann, M. H.; Fiedler, B. & Schulte, K. - Comp. Sci. Technol., 65, p.2300 (2005).

7. Wang, Y.; Xiong, H.; Gao, Y. & Li, H. - J. Mater. Sci., 43, p.5609 (2008).

8. Tanaka, Y.; Bauer, R. S. - “Epoxy resins - Chemistry and technology”, Marcel Dekker, New York (1988).

9. Chitwood, H. C. & Freure, B. T. - J. Am. Chem. Soc., 68, p.680 (1946).

10. Shechter, L.; Wynstra, J. & Kurkjy, R. P. - Ind. Eng. Chem., 49, p.1107 (1957).

11. Ståhlbom, B.; Åkesson, B. & Jönsson, B. - Int. Arch. Occup. Environ. Health, 70, p.393 (1997).

12. Montserrat, S.; Flaqué, C.; Calafell, M.; Andreu, G. & Málek, J. - Thermochim. Acta, 269/270, p.213 (1995).

13. Sbirrazzuoli, N.; Mititelu-Mija, A.; Vincent, L. & Alzina, C. - Thermochim. Acta, 447, p.167 (2006).

14. Chiao, L. - Macromolecules, 23, p.1286 (1990).

15. Mijovic, J. & Wijaya, J. - Polymer, 35, p.2683 (1994).

16. Swier, S. & van Mele, B. - Termochim. Acta, 411, p.149 (2004).

17. Xu, L. et al. - Ind. Eng. Chem. Res., 35, p.963 (1996).

18. Finzel, M. C. et al. - J. Polym. Sci., Part A: Polym. Chem., 33, p.673 (1995).

19. Garcia, F. G. & Soares, B. G. - Polym. Test., 22, p.51 (2003).

20. Heald, C. R.; Stolnik, S.; Kujawinski, K. S.; Matteis, D.; Garnett, M. C.; Illum, L.; Davis, S. S.; Purkiss, S. C.; Barlow, R. J. & Gellert, P. R. - Langmuir, 18, p.3669 (2002).

21. Ren, J.; Hong, H.; Ren, T. & Teng, X. - React. Funct. Polym., 66, p.944 (2006).

22. Loos, M. R.; Coelho, L. A. F.; Pezzin, S. H. & Amico, S. C. - Polímeros, 18, p.76 (2008).

23. Lau, K.; Gu, C.; Hui, D. - Composites: Part B, 37, p.425 (2006).

24. Niu, L.; Luo, Y. & Li, Z. – Sens. Actuat. B., 126, p.361 (2007).

25. Samanta, B. C.; Maity, T.; Kar, S. & Banthia, A. K. – Pigm. Resin Technol., 4, p.34 (2005).

26. Kundu, J.; Patra, C. & Kundu, S. C. - Mat. Sci. Eng. C., 28, p.1376 (2008).
588371687f8c9d0a0c8b48ae polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections