Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/doi/10.1590/S0104-14282010005000030?lang=en
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Tratamento de Superfície de Tubos de Poliamida 11 com Chama para Deposição de Revestimento Hidrofílico Biomédico

Flame Surface Treatment of Polyamide 11 Tubes for the Deposition of Biomedical Hydrophilic Coatings

Martins, Waldemar F. M.; Fúcio, Débora M.; Mattoso, Frederico S.; Wiggers, William S.; Salmoria, Gean V.

Downloads: 0
Views: 1249

Resumo

O processo para obtenção de uma camada polimérica hidrofílica sobre um componente polimérico pode ser basicamente dividido em: tratamento de superfície do substrato, aplicação e cura do revestimento. O tratamento de superfície se faz necessário em função da grande diferença de polaridade comumente apresentada entre os materiais que compõem este conjunto e da baixa energia livre de superfície inerente aos principais materiais utilizados como substrato, fatores estes que dificultam a adesão entre eles. Neste trabalho foi avaliada a influência da técnica de tratamento de superfície através de exposição à chama sobre a tentativa de aumento da energia livre de superfície de tubos de poliamida 11. Amostras foram submetidas ao tratamento durante 5, 10, 20, 30 e 60 segundos, e posteriormente caracterizadas por goniometria, microscopia eletrônica de varredura, espectroscopia de infravermelho e resistência ao risco da camada depositada. Amostras não tratadas foram analisadas como parâmetro de controle das modificações. Os resultados mostraram um aumento da molhabilidade e rugosidade da superfície, além de uma melhoria na adesão da camada hidrofílica após o tratamento.

Palavras-chave

Poliamida 11, tratamento de superfície, revestimento hidrofílico.

Abstract

The process of obtaining a hydrophilic polymer coating on a polymeric component or product can be basically divided into: the substrate surface treatment, the coating application and the cross-linking. The substrate surface treatment is crucial due to the possible large difference in polarity between the polymers and the substrate materials, which commonly have low free surface energy and may severely hamper adhesion. This study evaluated the influence of flame surface treatment for the attempt of increasing the free energy surface of polyamide 11 tubes. Samples were submitted to treatment for 5, 10, 20, 30 and 60 seconds, and subsequently characterized by goniometry, scanning electron microscopy, infrared spectroscopy and scratch resistance of the deposited layer. Untreated samples were analyzed as a control parameter of the changes. The results showed an increase in wettability and surface roughness, and also an improvement in the adhesion of the hydrophilic coating after treatment.

Keywords

Polyamide 11, surface treatment, hydrophilic coating.

References



1. Laporte, R. J. - “Hydrophilic polymer coatings for medical devices: structure/properties, development, manufacture and applications”, CRC PRESS, New York (1997).

2. Baijal, M. D. - “Plastics Polymers Science and Technology”, John Wiley & Sons, New York (1982).

3. Öztürk, G. I. - “Selected Methods of Surface Engineering Applied to Materials Science”, Dissertação de Mestrado, Sabancı University, Turquia (2004).

4. Burakowski, L. & Rezende, M.C. – Polímeros, 11, 2, p.51-57 (2001).

5. Sheng, E.; Sutherland, I.; Brewis, D. M.; Heath, R. J. & Bradley, R. H. – Journal of Materials Chemistry, 3, p.487-490 (1994).

6. Kilic, B.; Aksit, A.C. & Mutlu, M. International Journal of Clothing Science and Technology, 21, p.137-145 (2009).

7. Desmet, T.; Morent, R.; De Geyter, N.; Leys, C.; Schacht, E. & Dubruel, P. -Biomacromolecules, 10, 9, p.2351-2378 (2009).

8. Hao, L. & Lawrence, J. – “Laser Surface Treatment of Bio-Implant Materials”, Wiley, New Jersey (2005).

9. Waugh, D. G.; Lawrence, J.; Walton, C. D. & Zakaria, R.B. - Optics & Laser Technology, 42, p. 347-356 (2010).

10. Acquarulo, L. A. Jr.; O’Neil, C. J. & Nilajkar, A. S. - “Lubricious compounds for biomedical applications using hydrophilic polymers”, World Intellectual Property Organization, Switzerland (2006).

11. Van Krevelen, D. W. - “Properties of polymers: their correlation with chemical structure; their numerical estimation and prediction from additive group contributions”, Elsevier Science, Amsterdam (1997).

12. Dorai, R. & Kushner, M. J. - Journal of Physics D: Applied Physics, 36, p. 666-685 (2003).

13. Gutowski, W. S.; Wu, Dong Y. & Li, S. – “Surface Treatment of Polymers”, Patent Number: 5.879.757, United States Patent (1999).

14. ASTM D7027 – “Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine”, West Conshohocken (2005).

15. Silverstein, R. M.; Bassler, G. C. & Morrill, T. C. - “Spectrometric Identification of Organic Compounds”, John Wiley & Sons, New York (1997).
5883715f7f8c9d0a0c8b487f polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections