Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/doi/10.1590/S0104-14282007000200004?lang=en
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Blendas PVC/NBR por Processamento Reativo I: Desenvolvimento do Processo de Vulcanização Dinâmica in situ

PVC/NBR Blends by Reactive Processing I: In situ Dynamic Vulcanization Process

Rodolfo Junior, Antonio; Pessan, Luiz A.; Passador, Fábio R.

Downloads: 0
Views: 998

Resumo

Vulcanização dinâmica é o processo de vulcanização de um elastômero durante a mistura no estado fundido com um termoplástico, que resulta em uma classe de materiais denominada termoplásticos vulcanizados. Neste trabalho, um novo tipo de termoplástico vulcanizado foi obtido por vulcanização dinâmica in situ da blenda PVC/NBR, utilizando-se um sistema de cura a base de enxofre (S) e combinação dos aceleradores 2,2-ditiomercaptobenzotiazol (MBTS) e dissulfeto de tetrametiltiuram (TMTD). As blendas PVC/NBR (90/10, 80/20 e 70/30% em massa) foram processadas em um reômetro de torque Haake (Rheomix 600) a 160 °C com rotação de 60 rpm. As blendas obtidas por processamento reativo foram caracterizadas por calorimetria diferencial de varredura (DSC) para determinação do grau de cura. Observou-se aumento no grau de cura das blendas com o tempo de mistura sendo o sistema de cura considerado eficiente.

Palavras-chave

Vulcanização dinâmica, poli (cloreto de vinila), borracha nitrílica, blenda PVC/NBR

Abstract

Dynamic vulcanization is a process of vulcanization of an elastomer during melt mixing with a thermoplastic wich results in material called thermoplastic vulcanizates or TPVs. In this study, a new kind of TPV was obtained by in situ dynamic curing of poly(vinyl chloride) (PVC)/nitrile rubber (NBR) blends. The crosslinking of PVC/NBR blends was accomplished using sulphur (S)/tetramethylthiuram disulphide (TMTD) and mercaptobenzthiazyl disulphide (MBTS) curative system during the reactive processing. The blends of PVC/NBR at the ratio of 90/10; 80/20 and 70/30 wt. (%) were melt mixed using a Haake Rheomix 600 at 160 °C and rotor speed of 60 rpm. The curing behavior of NBR was investigated by a Monsanto Rheometer and the degree of cure was calculated using differential scanning calorimetry (DSC) for different mixing times. It was observed that the degree of cure increases with the mixing time and the crosslinking system used in this work was considered efficient.

Keywords

Dynamic vulcanization, poly (vinyl choride), nitrile rubber, reactive processing, PVC/NBR blends

References



1. Browmick, A. K.; Hall, M. M. & Benarey, H. A. - “Rubber products manufacturing technology”, Marcel Dekker Inc, New York (1997).

2. Hills, D. A. - “Heat transfer and vulcanisation of rubber”, Applied Science Publishers Ltd., Londres (1971).

3. Coran, A. Y. in: Handbook of elastomers – new developments and technology, Stephens H. L., (ed.), Dekker Inc, New York (1988).

4. Akiba, M. & Hashim, A. S. - Prog. Polym. Sci., 22, p.475 (1997).

5. Walker B. M. & Rader C. P. - “Handbook of thermoplastic elastomers”, Van Nostrand Reinhold, New York (1988).

6. Zhu, S. H.; Chan, C. M. & Zhang, Y. X. - J. Appl. Polym. Sci., 58, p.621 (1995).

7. Zhu, S. H. & Chan, C. M. - Polym., 39, p.7023 (1998).

8. Parnell, S. & Min, K. - Polym. Eng. Sci., 45, p.876 (2005).

9. Paul, D. R. & Newman, S. - “Polymers blends”, vol.1, Academic Press, New York (1978).

10. Passador, F. R.; Pessan, L. A. & Rodolfo, Jr A. – Pol.: Ciênc. Tecnol., 16, p.174 (2006).

11. Shen, F.; Li, H.; Wu, C. - J. Polym. Sci., Part B: Polym. Phys., 44, p.378 (2006).

12. Manoj, N. R.; De, P. P.; De, S. K. - J. Appl. Polym. Sci., 49, p.133 (1993).

13. Manoj, N. R.; De, P. P. - Polym., 39, p.733 (1998).

14. Gosh, P.; Sem, A. K. & Ray, P. - Polym., 33, p.744 (1992).

15. Oravec J.; Oishi Y.; Hirahara H. & Mori K. – Polym. Inter., 32, p.303 (1993).

16. Morton, M. - “Rubber Technology”, Robert E. Krieger Publishing Company, Florida (1981).

17. Oliveira, M. G. & Soares, B. G. - Pol.: Ciênc.Tecnol., 12, p.11 (2002).

18. Paul, D. R. & Newman, S. - “Polymer Blends”, Academic Press Inc, New York (1978).

19. Wang, Q.; Zhang, X.; Liu, S.; Gui, H. & Lai J. - Polym., 46, p.10614 (2005).

20. Sen, A.; Mukherjee, G. S. - Polym., 34, p.2386 (1993).

21. Huang J. C. - J. Appl. Polym. Sci., 89, p.1242 (2003).
588371197f8c9d0a0c8b471b polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections