Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/doi/10.1590/S0104-14282005000400010
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Caracterização do Sistema Éter Diglicidílico do Bisfenol A/Poliaminas Alifáticas

Characterization of Diglycidyl Ether of Bisphenol A / Aliphatic Polyamines Systems

Soares, Bluma G.; Miguez, Eduardo; Garcia, Filiberto González

Downloads: 0
Views: 1051

Resumo

O sistema epoxídico constituído pelo éter diglicidílico do bisfenol A (DGEBA), produto DER 331 com endurecedor 24 comercializados pela Dow Química do Brasil foi caracterizado por métodos espectroscópicos, calorimétricos e de determinação de grupos funcionais. O endurecedor 24 é constituído por trietilenotetramina (60 % molar) e uma mistura de etilenoaminas polifuncionais com estruturas lineares, ramificadas e cíclicas. O equivalente epoxídico da resina resultou de 187 g eq-1. A funcionalidade média, o equivalente de amina, e a concentração do endurecedor que satisfaz a estequiometria, corresponde a 5,54, 27,5 g eq-1, e 14,7 phr, respectivamente. O sistema epoxídico manifestou uma entalpia de reação de 486 J g-1 (106,6 kJ eq-1), e uma temperatura de transição vítrea (Tg∞) de 124 °C. O trabalho apresenta ainda um programa de cura em duas etapas onde se alcança a conversão máxima, e se apresenta o diagrama de transformações conversão vs temperatura (CTT).

Palavras-chave

Éter diglicidílico do bisfenol A (DGEBA), trietilenotetramina (TETA), diagrama de transformações conversão vs temperatura (CTT)

Abstract

Diglycidyl ether of the bisphenol A (DGEBA), product DER 331 and hardener 24 system marketed by Chemical Dow of Brazil were characterized by spectroscopic, calorimetric and determination of functional groups methods. The hardener 24 is constituted by triethylenetetramine (60 % molar) and a mixture of ethylene polyfunctional amines with linear, ramified and cyclic structures. The epoxy equivalent of the resin corresponds to 187 g eq-1. The functionality average, equivalent amine, and the concentration of the hardener that satisfy the stoichiometry corresponds to 5.54, 27.5 g eq-1, and 14.7 phr, respectively. The epoxy system displayed an enthalpy of reaction of 486 J g-1 (106.6 kJ eq-1), and a glass transition temperature (Tg¥) of 124 °C. Also presented in this work is a cure program in two stages where the maximum conversion was reached.

Keywords

Diglycidyl ether of bisphenol - A (DGEBA), triethylenetetramine (TETA), diagram conversion time temperature (CTT)

References



1. Lee, H. & Neville, K.; “Handbook of Epoxy Resins”, McGraw- Hill, Inc. New York, cap.7, págs.1-10; cap.4, p.19; cap.7, pag.9 e 2 (1967).

2. Pérez, R.J.; “Commercial Epoxy Resin Curing Agents”, em Epoxy Resin Technology, editado por Paul F. Bruins, Interscience Publishers, John Wiley & Sons, New York, p.45 (1968).

3. Scola, D.A.; “Novel Curing Agents for Epoxy Resins”; em Developments in Reinforced Plastics-4, editado por G. Pritchard, Elsevier Applied Science Publishers, New York, p.165 (1984).

4. González, F. & Soares, B.G. - Polym. Test., 22, p.51 (2003).

5. Macosko, C.W. & Miller, D.R. - Macromolecules, 9, p.199 (1976).

6. Bulai, A.K.; Slonim. I.Y.; Urman, Y.G.; Vakulenko, V.A. & Chetverikova, A.T. - Polymer Science U.S.S.R., Vol.28, No.8, p.1854 (1986).

7. González, F.; Pérez, C.; Galego, N.; Martínez, R. & Rosado, A. - Revista Cubana de Química, vol.V, No.3, p.44 (1989).

8. Klute, C.H. & Viehmann, W. - J. Appl. Polym. Sci., 5, p.86 (1961).

9. Horie, K.; Hiura, H.; Sawada, M.; Mita, I. & Kambe, H. - J. Polym. Sci. (A-1), 8, p.1357, (1970).

10. Rozenberg, B.A.; “Kinetic, Thermodynamics and Mechanism of Reactions of Epoxy oligomers with Amines”, em Epoxy Resins and Composites II, editado por K. Dušek, Springer-Verlag, Berlin Heidelberg, p.115 (1986).

11. Galy, J.; Sabra, A. & Pascault, J.P. - Polym. Eng. Sci., 26, p.1514 (1986).

12. Vallo, C.I.; Frontini, P.M. & Williams, R.J.J. - J. Polym.: Part B: Polym. Phys., 29, p.1503 (1991).

13. Eloundou, J.P.; Feve, M.; Harran D. Pascault, P.J. - Die. Age. Makromol. Chem., 230, p.13 (1995).

14. Babayevsky, P.G. & Gillham, J.K. - J. Appl. Polym. Sci., 17, p.2067 (1973).

15. Gillham, J.K. & Benci, J.A. - J. Appl. Polym. Sci., 18, p.951 (1974).

16. Gillham, J.K. - Polym. Eng. Sci., 16, p.353 (1976).

17. Wisanrakkit, G. & Gillham, J.K.; “The Glass Transition Temperature as a Parameter for Monitoring the Isothermal Cure of an Amine- Cured Epoxy Resins” em Polymer Characterization Physical Property, Spectroscopic, and Chromatography Methods, editado por C.D. Craver. American Chemical Society, Washington, DC, p.143 (1990).

18. Aronhime, M.T. & Gillham J.K. – “Time-Temperature- Transformation (TTT) Cure Diagram of Thermosetting Polymeric Systems” em Epoxy Resins and Composites II, editado por K. Dušek, Springer-Verlag, Berlin Heidelberg, p.83 (1986).

19. Adabbo, H.E. & Williams, R.J.J. - J. Appl. Polym. Sci., 27, p.1327 (1982).

20. Miller, D.R.; Vallés E. & Macosko, C.W. - Polym. Eng. Sci.., 19, p.272 (1979).
588371097f8c9d0a0c8b46c8 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections