Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/doi/10.1590/S0104-14282005000300007
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Evolução da Morfologia de Fases de Blendas PA6/AES em Extrusora de Dupla Rosca e Moldagem por Injeção

Evolution of Phase Morphology of PA6/AES Blends During the Twin Screw Extrusion and Injection Molding Processes

Covas, José A.; Machado, Ana V.; Pessan, Luiz A.; Hage Junior, Elias; Bassani, Adriane

Downloads: 0
Views: 990

Resumo

A evolução da morfologia de fases em blendas não reativas e reativas de poliamida-6 com copolímero de acrilonitrila/EPDM/estireno (AES) em uma extrusora de rosca dupla co-rotacional foi investigada. A evolução da morfologia de fases ao longo da extrusora de rosca dupla foi monitorada através da coleta de pequenas amostras em válvulas no barril da extrusora e caracterização por microscopia eletrônica de transmissão (MET). Foram utilizados como compatibilizantes reativos os copolímeros metacrilato de metila-co-anidrido maleico (MMA-MA) e metacrilato de metila-co-metacrilato de glicidila (MMA-GMA). Os grupos anidrido maleico e epóxi nos copolímeros podem reagir com os grupos finais de cadeia da poliamida durante o processamento no estado fundido e melhorar a interação na interfase do sistema PA6/AES. A blenda PA6/AES não compatibilizada apresentou uma morfologia grosseira de fases onde a fase AES não está bem dispersa na matriz de PA6 devido à falta de interações adequadas entre os componentes da blenda. A adição do compatibilizante MMA-GMA não proporcionou boa dispersão de fases e não melhorou as propriedades mecânicas da blenda, provavelmente porque as possíveis reações no sistema são lentas e podem não ocorrer na extrusora. Por outro lado, a blenda compatibilizada com o copolímero MMA-MA apresentou uma excelente resistência ao impacto à temperatura ambiente e uma diminuição na temperatura de transição dúctil-frágil. As partículas de AES apresentam-se muito mais refinadas e sofrem uma redução significativa em seu tamanho já no início do processo de extrusão. A morfologia observada nas amostras injetadas apresentou uma boa correlação com as propriedades mecânicas obtidas.

Palavras-chave

Poliamida-6, Morfologia, Compatibilização reativa

Abstract

The evolution of phase morphology in non-reactive vs reactive blends with polyamide and ethylene-propylenediene elastomer grafted with styrene-acrylonitrile copolymer (AES) in a co-rotating twin-screw extruder was investigated. The morphological evolution of these blends along a twin-screw extruder was monitored by quickly collecting small samples from the melt at specific extruder barrel locations and characterizing them with a transmission electron microscope (TEM). The copolymers methyl methacrylate-co-maleic anhydride (MMA-MA) and methyl methacrylate-co-glycidyl methacrylate (MMA-GMA) were used as compatibilizing agents. The maleic anhydride and the epoxy groups of the copolymers can react with the polyamide end groups during melt processing and improve the interphase interaction in the PA6/AES system. The uncompatibilized blends showed a coarse phase morphology where the AES phase is not well dispersed in the PA6 matrix due to lack of adequate interaction between the components. The addition of MMA-GMA compatibilizer neither promoted good phase dispersion or improved the mechanical properties of the blends, probably because the possible reactions are very slow and may not occur inside the extruder. On the other hand, the addition of the MMA-MA copolymer promotes better impact strength and good phase dispersion in the blend. The AES particles undergo significant reduction in the first stages of the mixture inside the extruder. The morphology observed for the injection molded specimens was correlated with the mechanical properties.

Keywords

Polyamide, reactive compatibilization, morphology

References



1. Zimmerman, J. - Encyclopedia of Polymer Science and Engineering – Polyamides, John Wiley & Sons, 11, pp. 315-381 (1985)

2. Kohan, M. I. - Nylon Plastic, New York: John Wiley & Sons (1973)

3. Lu, M. ; Keskkula H. and Paul, D. R. - Toughening of nylon- 6 with grafted rubber impact modifiers, J. Appl. Pol. Sci., 58, pp. 1175 (1995)

4. Royaltuf modified EPDM for tougher engineering thermoplastics and other rubber and plastics application, Uniroyal Chemical (1992)

5. Wefer, J. M. - Properties and structure of polyesterpolycarbonate blends containing grafted EPDM, SPEANTEC Tech. Papers (1990)

6. Kawanishi; K.; Tsuchikawa, S. and Kimura, S. - A study on polyamide 4,6/AES alloy, Composite Interfaces, 3, pp. 185 (1995)

7. Majundar; B.; Keskkula, H.; Paul, D. R. and Harvey, N. G. - Control of the morphology of polyamide/styreneacrylonitrile copolymer blends via reactive compatibilizers, Polymer, 35, pp. 4263 (1994)

8. Majundar, B.; Paul, D. R. and Oshinski, A. J. - Evolution of morphology in compatibilized vs uncompatibilized polyamide blends, Polymer, 38, pp. 1787 (1997)

9. Jeon, H. K. and Kim, J. K. - Morphological development with time for immiscible polymer blends with in situ compatibilizers under controlled shear conditions, Polymer, 39, pp. 6227 (1998)

10. Dedecker, K. and Groeninckx, G. - Reactive compatibilization of A/(B/C) polymer blends. Part 1. Investigation of the phase morphology development and stabilization, Polymer, 39, pp. 4985 (1998)

11. Cartier, H. and Hu, G. H. - Morphology development of in situ copatibilized semicrystalline polymer blends in a co-rotating twin-screw extruder, Pol. Eng. and Sci., 39, pp. 996 (1999)

12. Shearer, G. and Tzoganakis, C. - Analysis of mixing during melt-melt blending in twin screw extruders using reactive polymer tracers, Pol. Eng. and Sci., 39, pp. 1584 (1999)

13. Machado, A. V.; Covas, J. A. and Van Duin, M. - Chemical and morphological evolution of PA-6/EPM/EPM-g-MA in a twin screw extruder, J. Pol. Sci: Part A: Pol. Chem., 37, pp. 1311 (1999)

14. Machado, A. V.; Covas, J. A. and Van Duin, M. - Evolution of morphology and chemical conversion along the screw in a corotating twin-screw extruder, J. Appl. Pol. Sci., 71, pp. 135 (1999)

15. Lee, J. K. and Han, C. D. - Evolution of polymer blend morphology during compounding in a twin-screw extruder, Polymer, 41, pp. 1799 (2000)

16. Potente, H.; Bastian, M.; Bergemann, K.; Senge, M.; Scheel, G. and Winkelmann, T. - Morphology of polymer blends in the melting section of co-rotating twin screw extruders, Pol. Eng. and Sci., 41, pp. 222 (2001)

17. Machado, A. V.; Covas, J. A.; Wallet, M. and Van Duin, M. - Effect of composition and processing conditions on the chemical and morphological evolution of PA-6/ EPM/EPM-g-MA in a corotating twin-screw extruder, J. Appl. Pol. Sci, 80, pp. 1535 (2001)

18. Araújo, E. M. - Tenacificação da Poliamida-6 com ABS por meio da Técnica de Compatibilização in situ com o uso de Copolímeros Acrílicos, PhD Thesis, Department of Materials Engineering, Universidade Federal de São Carlos (2001)

19. Kudva, R. A.; Keskkula, H. and Paul, D. R. - Compatibilization of nylon 6/ABS blends using glycidyl methacrylate/methyl methacrylate copolymers, Polymer, 39, pp. 2447 (1998)

20. Bassani, A.; Hage, E. and Pessan, L. A. - Effects of composition, processing conditions and reactive compatibilization on the mechanical properties of PA6/ AES blends, PPS 18, Guimarães, Portugal (2002)

21. Litauszki, B.; Schmidt-Naake, G.; Kressler, J. and Kammer, H. W. - Miscibility of poly(methyl methacrylate-co-maleic anhydride) with styreneacrylonitrile and methyl methacrylate-styrene copolymers, Polymer Communications, 30, pp. 359 (1989)

22. Majundar, B.; Keskkula, H. and Paul, D. R. - Mechanical properties and morphology of nylon-6/acrylonitrilebutadiene- styrene blends compatibilized with imidized acrylic polymers, Polymer, 35, pp. 5453 (1994)

23. Paul, D. R.; Bucknall, C. B. Polymer Blends. New York: John Wiley & Sons, v. 1 e 2, 2000.

24. Duin, M. van; Aussems, M.; Borggreve, R. J. M. Graft formation, chain scission, morphology and rheology in blends of polyamide-6 and 6,6 with maleic anhydride containing polymers. In press.
588371067f8c9d0a0c8b46bc polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections