Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/doi/10.1590/S0104-14282005000300004?lang=en
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Efeito da Massa Molar e do Teor de Poliuretano nas Propriedades Mecânicas de Misturas Poli(Metacrilato de Metila)/Poliuretano

Effect of the molecular weight and polyurethane content on mechanical properties of poly(methyl methacrylate)/ polyurethane mixtures

Monteiro, Elisabeth E. C.; Pinto, Ubirajara F.

Downloads: 5
Views: 934

Resumo

Foi estudado o efeito da massa molar e do teor de três poliuretanos termoplásticos comerciais sobre as propriedades mecânicas de misturas físicas de poli(metacrilato de metila)/poliuretano. As amostras foram preparadas em reômetro Haake a 180°C/10 min e 60 rpm, e as composições das misturas foram 0/100, 10/90, 30/70, 50/50, 70/30, 90/10 e 100/0 de PMMA/TPU. Propriedades mecânicas como resistência à tração e alongamento na ruptura foram melhores para a amostra PU (85 A15), de menor massa molar mássica média (Mw = 138,000). Os resultados mostraram que o teor de TPU afeta fortemente as características do material cujas propriedades tornam-se progressivamente semelhantes às do componente em maior proporção. O estudo permitiu comparar os resultados de misturas obtidas por processamento em reômetro com dados relatados para IPNs simultâneos e sequenciais de PU/PMMA. O perfil do comportamento do módulo de elasticidade sugere a ocorrência de duas fases contínuas nas misturas TPU/PMMA de acordo com dados previstos por equações teóricas propostas para IPNs.

Palavras-chave

PMMA/TPU, misturas físicas, massa molar, propriedades mecânicas

Abstract

The effect of the molecular weight and polyurethane content of three commercial thermoplastic polyurethanes (TPU) on the mechanical properties of poly(methyl methacrylate)/polyurethane physical mixtures was studied. The samples were prepared using a Haake rheometer at 180°C/10min and 60rpm. The PMMA/TPU ratio of the blends was 0/100,10/ 90, 30/70, 50/50, 70/30, 90/10 and 100/0. The mechanical properties such as strain and stress at break are better for the sample PU(85 A15) of lower weight-average molecular mass (Mw = 138,000). The results showed that the TPU content influences strongly the characteristics of the material where the properties change progressively becoming similar to the high content component. The study allowed us to compare the results of blends obtained from rheometer processing with data reported for simultaneous and sequential PU/PMMA IPNs. The pattern of behavior of the elastic modulus suggests dual-phase continuity in the TPU/PMMA blends, consistent with theoretical equations proposed for IPNs.

Keywords

PMMA/TPU, physical mixtures, molecular weight, mechanical properties

References



1. Paul, D. R. & Newman, S. - “Polymer Blends”, Academic Press, New York (1978).

2. Utracki, L. A. – “Polymer Alloys and Blends: Thermodynamics and Rheology”, Hanser Publishers, New York (1990).

3. Lath, D.; Cowie, J.M.G. & Lathov, E. – Int. Polym. Sci. Technol. 22, T/84 –T/86 (1995).

4. Casarino, P.; Brunacci, A. & Pedemonte, E. – Macromolecules Chem. Phys. 197, 3773-3782 (1996).

5. Koning, C.; Duin, M. V.; Pagnoulle, C. & Jerome, R. – Prog. Polym. Sci. 23, 707-757 (1998).

6. Mano, E. B. – “Polímeros como Materiais de Engenharia“, Edgard Blucher Ltda., São Paulo (1991).

7. Rigkowski, J. & Kaskawski, W. - Die Angew. Makromol. Chem., 82, 157 (1979).

8. Rigkowski, J.; Skowronski, T. & Masiulanis, B. - Die Angew. Makromol. Chem., 85, 129 (1980).

9. Yue, M. Z. & Chian, K.S. - J. Appl. Polym. Sci. 60, 597 (1996).

10. Zerjal, B.; Jelcic, Z. & Malavasic, T. - Eur. Polym. J., 32, 1351-1354 (1996).

11. Heim, Ph.; Wrotecki, C.; Avenel, M. & Gaillard, P. – Polymer, 34, 1653-1660 (1993).

12. Rizos, A. K.; Fytas, G.; Ma, R. J.; Wang, C. H.; Abertz V. & Meyer, G. C. – Macromolecules, 26, 1869-1875 (1993).

13. Kaczmarek, H. & Decker, C. – J. Appl. Polym. Sci., 54, 2147-2156 (1994).

14. Mishra, V.; Du Prez, F. E.; Gosen, E.; Goethals, E. J. & Sperling, L. H. - J. Appl. Polym. Sci., 58, 331-346 (1995).

15. Mishra, V.; Du Prez, F. E.; Goethals, E. J. & Sperling, L.H - .J. Appl. Polym. Sci., 58, 347-356 (1995).

16. Nair, P. D. & Krishnamurthy, V. N. - J. Appl. Polym. Sci., 60, 1321-1327 (1996).

17. Mello, E. M. V. - “Avaliação de propriedades de misturas físicas de poliuretano termoplástico e poli(metacrilato de metila)”, Tese de Mestrado, UFRJ/IMA, Rio de Janeiro, (1997).

18. American Society for Testing and Materials, ASTM D882- 91 -”Standard Test Methods for Tensile Properties of Thin Plastic Sheeting”. 1994 Annual Book of ASTM Standards, vol. 08.01, Philadelphia (1994).

19. American Society for Testing and Materials, ASTM E104 -”E171-82 -”Standard Atmospheres for Conditioning and Testing Materials”. 1986 Annual Book of ASTM Standards, vol. 08.03, Philadelphia (1986).

20. Pinto, U. F. - “Avaliação de propriedades e características de processamento de misturas físicas de poliuretanos termoplásticos e poli(metacrilato de metila)”, Tese de Doutorado, IMA/UFRJ, Rio de Janeiro, 2003.

21. Akay, M. & Rollins, S.N. - Polymer 34, 1865-1873 (1993).

22. Utracki, L. A. - “Polymer Alloys and Blends”, Hanser Publishers, Munich, part 3, 1989.

23. Sperling, L. H. - “Interpenetrating Polymer Networks and Related Materials”, Plenum Press, cap. 6, 1981.

24. Nielsen, L. E. – “Mechanical Properties of Polymers and Composites”, vol.2, Marcel Dekker, Inc., New York, 1974.

25. Kelley, S. S.; Ward, T. C. & Glasser, W.G. - J. Appl. Polym. Sci., 41, 2813-2828 (1990).
588371057f8c9d0a0c8b46b9 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections