Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/doi/10.1590/S0104-14282004000500013?lang=en
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Moldes de ABS Construídos pelo Processo de Modelagem por Fusão e Deposição para Injeção de PP e PEBD

PP and LDPE Injection in ABS Molds Built with Fused Deposition Modeling

Foggiatto, José A.; Ahrens, Carlos H.; Salmoria, Gean V.; Pires, Alfredo T. Nunes

Downloads: 0
Views: 1022

Resumo

Os processos de prototipagem rápida (Rapid Prototyping – RP) e ferramental rápido (Rapid Tooling – RT) surgiram para reduzir os tempos de desenvolvimento de produtos na fase de projeto diminuindo a necessidade de retrabalhos e, conseqüentemente, antecipando a entrada de novos produtos no mercado. Neste trabalho foi utilizada uma das tecnologias de prototipagem rápida, denominada Modelagem por Fusão e Deposição (FDM), na construção de moldes em ABS com o objetivo de investigar sua aplicação na moldagem por injeção de termoplásticos. Amostras das peças injetadas foram submetidas a ensaios de difração de raios X, dureza Shore D e tração. Os resultados mostraram a viabilidade de fabricar pequenos lotes de peças em PEBD e PP com propriedades mecânicas bastante similares às encontradas em peças moldadas em moldes metálicos.

Palavras-chave

Prototipagem rápida, modelagem por fusão e deposição, ferramental rápido

Abstract

Rapid Prototyping and Rapid Tooling are aimed at reducing the development time of products in the design phase by minimizing re-workings and, consequently, reducing the time to launch new products. In this work one of the technologies of rapid prototyping, called Fused Deposition Modeling (FDM), was used in the construction of ABS molds with the objective of investigating its application in the injection molding of thermoplastics. Specimens of the molded parts were characterized with X-ray diffraction, Shore D hardness and tensile tests. The results demonstrated the viability to manufacture small batches of LDPE and PP parts with mechanical properties similar to those molded parts in metallic molds.

Keywords

Rapid prototyping, fused deposition modeling, rapid tooling

References



1. Gomide, R. B. – “Fabricação de Componentes Injetados com Uso de Insertos de Resina Termofixa Produzidos por Estereolitografia”, Dissertação de Mestrado, Universidade Federal de Santa Catarina, Brasil, (2000).

2. Dickens, P. M. – “Rapid tooling techniques”, in Proceedings of EuroMold’99 Conference, RP’s Strategic Benefits and Risks, Frankfurt, Germany, (1999).

3. King, D. & Tansey, T. – “Alternative materials for rapid tooling”, Journal of Materi

4. Stratasys Inc. – “FDM 2000 Manual”, Stratasys Document no 105215-0001 Rev. 5B, Eden Prairie, USA, (2001).

5. Masood, S.H.; Song W.Q.; Hodgkin, J.K.; Friedl, C. – “Rapid Tooling for Injection Moulding using Fused Deposition Modelling”, in Annals of 57th ANTEC – Annual Technical Conference, New York, USA, (1999).

6. Stratasys Inc. “FDM 2000 Manual”, Stratasys Document no 105215-0001 Rev. 5B, Eden Prairie, USA (2001).

7. Barry, C.; Boothroyd, P.; Lai, F.; Nunn, R.E.; Orroth, S.A.; Schott N.R.; “Short Shot Method of Injection Molding. Plastics Processing”, Laboratory Syllabus, University of Massachusetts, Lowell-Plastic Engineering Department, 6o ed., p. 61, USA, (1995).

8. Velasco, J.I.; Morhain, C.; Martínez, A.B.; Rodríguez- Pérez, M.A.; De Saja, J.A.; “The effect of filler type, morphology and coating on the anisotropy and microstructure heterogeneity of injection-moulded discs of polypropylene filled with aluminium and magnesium hydroxides. Part 1. A wide-angle X-ray diffraction study”, Polymer, 43, p.6805–6811, (2002).

9. Addink, E.J., Beintema J., “Polymorphism of crystalline polypropylene” Polymer; 2, p.185–193, (1961).

10. Rybnikar, F. “Orientation in composite of polypropylene and talc”, Journal of Applied Polymer Science, 38:8, p.1479–1490, (1989).

11. Ahrens, C. H., Lafratta, F. H., Foggiatto, J. A., Salmoria, g., Volpato, N., Ferreira, A. C. “Estudo da Estrutura e Propriedades de Peças de PP Moldados por Injeção em Ferramentas de Prototipagem” In: XV Congresso Brasileiro de Engenharia e Ciência dos Materiais, Natal-RN (2002).
588371007f8c9d0a0c8b469b polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections