Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/doi/10.1590/S0104-14282002000400012
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Estudo da Degradação In Vitro de Blendas de Poli(p-dioxanona)/Poli(l-Ácido Láctico) (PPD/PLLA) Preparadas por Evaporação de Solvente

Degradation of Poly (L-Lactic Acid) (PLLA) and Poly-p-Dioxanone (PPD) Blends Prepared by Casting: In Vitro Study

Pezzin, Ana P. T.; Zavaglia, Cecília A. C.; Duek, Eliana Ap. R.

Downloads: 0
Views: 1025

Resumo

Blendas de dois polímeros semi-cristalinos biorreabsorvíveis, o poli(ácido láctico) (PLLA) e a poli(p-dioxanona) (PPD), foram preparadas por evaporação de solvente em diferentes composições. As blendas foram imersas em tubos de ensaio contendo solução tampão fosfato (pH = 7,4) em um banho termostatizado a 37 ± 1°C e avaliadas por calorimetria diferencial de varredura (DSC), análise termogravimétrica (TGA) e microscopia eletrônica de varredura (MEV). Foi observado através do estudo in vitro que o PLLA apresenta uma taxa de degradação mais lenta que a PPD e que as blendas apresentam taxa de degradação intermediária, mostrando que é possível variar a taxa de degradação das blendas alterando sua composição.

Palavras-chave

Blendas poliméricas, polímeros biorreabsorvíveis, degradação in vitro, poli(ácido láctico), PLLA, poli(p-dioxanona), PPD

Abstract

Blends of two crystalline bioreabsorbable polymers, poly(L-lactic acid) (PLLA) and poly(pdioxanone) (PPD), have been prepared by solvent casting in different compositions. The blends were immersed in tubes containing a phosphate buffer solution (pH = 7.4) in a thermally controlled bath of 37 ± 1°C and studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). It was observed by in vitro study that PLLA has a slower degradation rate than PPD and the blends presented an intermediate degradation rate. This shows that it is possible to vary the degradation rate of the blend by changing its composition.

Keywords

Polymeric blends, bioreabsorbable polymers, in vitro degradation, poly(lactic acid), PLLA, poly(pdioxanone), PPD

References



1. Iannace, S.; Ambrosio, L.; Huang, S.J.; Nicolais, L. - J. Appl. Polym. Sci., 54, p.1525 (1994).

2. Beiser, I.H.; Kanat, I.O. - Journal of the American Podiatric Medical Association, 80, p.72 (1990).

3. Langer, R.; Cima, L.G.; Tamada, J.A.; Wintermantel, E.- Biomaterials, 11, p.738 (1990).

4. Cha, Y.; Pitt, C.G.- Biomaterials, 11, p. 108 (1990).

5. Pearce, R.; Marchessault, R.H.- Polymer, 35, p. 3990 (1994).

6. Holland, S.J.; Yasin, M.- J.Controlled Rel., 4, p. 155 (1986).

7. Dumitriu, S. – "Polymeric Biomaterials", Marcel Dekker, New York (1996).

8. Lindhardt R. – "Biodegradable Polymers for Controlled Release of Drugs", Springer-Verlag., New York (1988).

9. Vert, M.; Li, S.; Garreau, H. - J. Controlled Release, 16, p.15 (1991).

10. Assis, P.R.V.; Pezzin, A.P.T.; Zavaglia, C.A.C. and Duek, E.A.R..- "Synthesis and characterization of poly(p- dioxanone) membranes prepared by casting and phase separation", in: Anais do VI Simposio Latino Americano de Polímeros (SLAP VI), IV Congresso Ibero Americano de Polímeros (CIP IV) e IV Simposio Chileno de Química Y Físico Química de Polímeros (CHIPOL IV), 1, p. 201, Viña del Mar, Chile (1998).

11. Duek, E.A.R.; Zavaglia, C.A.C.; Belangero, W.D.- Polymer, 40, p.6465 (1999).

12. Lin, H.L.; Chu, C.C.; Grubb, D. - J. Biomedical Mater. Res., 27, p.153 (1993).

13. Tsuji, H.; Ikada, Y. - Polymer Degradation and Stability, 67, p.179 (2000).

14. Tsuji, H.; Ikada, Y. - J. Appl. Polym. Sci., 631, p.855 (1997).

15. Sabino, M. A.; González, S.; Márquez, L.; Feijoo, J.L.- Polymer Degradation and Stability, 69, p.209 (2000).

16. Chu, C.C.; Browning, A.- J. Biomed. Mater. Res., 22, p.699 (1988).

17. Migliaresi, C.; Fambri, L.; Cohn, D.- J. Biomater. Sci., Polym. Ed., 5, p.591 (1994).

18. Pezzin, A.P.T.; Alberda van Ekenstein, G.O.R.; Duek, E.A.R.- Polymer, 42, p.8303 (2001).

19. Nijennhuis, A.J.; Grijpma, D.W.; Pennings, A.J.- Polymer Bulletin, 26, p.71 (1991).

588370ec7f8c9d0a0c8b4638 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections