Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/doi/10.1590/S0104-14282002000400008?lang=en
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Determinação da Distribuição de Tempos de Residência em Tempo Real no Processamento Reativo de Blendas Poliméricas

Real-time Determination of the Residence Time Distribution During Reactive Processing of Polymer Blends

Melo, Tomás J. A. de; Canevarolo Junior, Sebastião V.

Downloads: 1
Views: 1072

Resumo

Determinou-se por transmissão de luz a distribuição de tempos de residência (DTR) em tempo real em uma extrusora com rosca dupla co-rotativa e autolimpante onde o sinal do detetor é sensível à presença da segunda fase dispersa, usada como traçador. Vários traçadores foram utilizados em diferentes concentrações: dois pigmentos (TiO2 e ftalocianina) e dois polímeros (poliestireno PS e poliamida-6 PA6) sendo adicionados na forma de um pulso em um fluxo de polipropileno (PP). Os parâmetros temporais (tempos de residência inicial, ti e médio tn e a variância normalizada sq 2) medidos nas mesmas condições de processamento são muito próximos, dentro do erro experimental, indicando que a dispersão axial neste tipo de extrusora é independente do traçador. Por outro lado curvas de DTR medidas usando-se um polímero traçador (PS) disperso em um polímero de fluxo (PP) ficam deslocadas no tempo quando a situação é invertida, ou seja, usando-se PP como traçador em um fluxo de PS. Os parâmetros temporais são dependentes das características reológicas do polímero de fluxo, assim diferentes tipos de um mesmo polímero apresentam DTR com formas diferentes e deslocadas no tempo. A intensidade do sinal produzido pelo detetor é dependente não só da concentração mas também das características ópticas do par polímero/traçador, ou polímero/fase dispersa. Misturas poliméricas reativas (PP/PA6/PP-g-AA) e não reativas (PP/PA6) apresentaram diferenças na intensidade do sinal da DTR, devido à ocorrência da reação de graftização com conseqüente mudança na morfologia e no comportamento reológico. Estes resultados foram corroborados com medidas "off-line" por espectroscopia no infravermelho.

Palavras-chave

Extrusora dupla rosca, distribuição de tempos de residência, processamento reativo

Abstract

The residence time distribution (RTD) was measured on-line using light transmission in a twin-screw extruder with the detector signal being sensitive to the dispersed phase that was used as tracer. Various tracers were used in different concentrations: two pigments (TiO2 and phthalocyanine) and two polymers (polystyrene PS and polyamide-6 PA6) added as a pulse in a polypropylene PP flow. The time characteristics (delay ti, average tn, and normalised variance, sq²) measured at the same processing conditions are very close, inside the experimental error, indicating that the axial dispersion in this type of extruder is independent of the tracer. On the other hand, RTD curves measured using a polymer tracer (PS) dispersed in a polymer flow (PP) are shifted in time when the materials are inverted, i.e. using PP as tracer in a PS flow. The time parameters depend on the rheological characteristics of the flowing polymer, thus different polymer types show RTD curves with changes in shape and shifted in time. The detector signal intensity is dependent not only on the tracer concentration but also on the optical characteristics of the polymer/tracer pair. Reactive (PP/PA6/PP-g-AA) and non-reactive (PP/ PA6) polymer blends show differences in the RTD signal intensity due to the grafting reaction and its influence on the morphology and rheological behaviour. These results were corroborated via off-line infrared spectroscopy.

Keywords

Twin-screw extruder, residence times of distribution, reactive processing

References



1. Zloczower, I. M. & Tadmor, Z.-"Mixing and Compounding of Polymers: Theory and Practice", Hanser, New York (1994).

2. Rauwendaal, C.-"Mixing in Polymer Processing", Marcel Dekker, Inc., New York (1991).

3. White, J. L.-"Twin Screw Extrusion: Technology and Principles", Hanser, New York, (1990).

4. Xanthos, M.-"Reactive Extrusion: Principles and Practice", Oxford University Press, New York, (1992).

5. Todd, D. B. & Irving, H. F.- Chem. Eng. Prog., 65, p.84 (1969).

6. Chen, T.; Patterson, W.I.& Dealy, J.M.- Int. Polym. Proc.,10, p.3 (1995).

7. Gao, J.; Walsh, G. C.; Bigio, D.; Briber, M. B. & Wetzel, M.D.- AIChE J., 45, p. 2541 (1999).

8. Glenn, E. G.; Bigio, D. & Marks, C.- Polym. Eng. Sci., 39, p.286 (1999).

9. Gao, J.; Walsh, G. C.; Bigio, D.; Briber, M. B. & Wetzel, M.D.- Polym. Eng. Sci., 40, p. 227 (2000).

10. Mélo, T. J. A & Canevarolo, S. V.- Polym. Eng. Sci., 42, p.170 (2002).

11. Wolf, D. & White, D. H.- AIChE J., 22, p.122 (1976).

12. Wolf, D.; Holin, N. & White, D. H.- Polym. Eng. Sci., 26, p. 640 (1986).

13. Thompson, M.; Puaux, J.P.; Hrymak, A.N. & Hamielec, A.E.- Int. Polym. Proc.,10, p.111 (1995).

14. Pallas, R.; Batz, H.; Franzhein, O.; Stephan, M. & Zeuner, A.-"Different Flow (RTD) of Separate Radionuclide Labelled Blend Components During Reactive Melt Mixing on a TSE ZSK 40", in: PPS, p.3:1, Secaucus, (1997).

15. Gendron, R.; Daigneaut, L.E.; Tatibouet, J. & Dumoulin, M.- Adv. Polym. Tech.,15, p. 111 (1996).

16. Bur, A.J.& Gallant, F. M.- Polym. Eng. Sci., 31, p.1365 (1991).

17. Hu, G.H. & Kadri, I.- Polym. Eng. Sci., 39, p. 299 (1999).

18. Hu, G.H. & Kadri, I.- Polym. Eng. Sci., 39, p. 930 (1999).

19. Schule, H.; Meder,S. & Stuttgart, C. M.- Kunst. Germ. Plast., 78, p.26 (1988).

20. Puaux, J.P.; Bozga, G. & Ainser, A.- Chem. Eng. Sci., 55, p.1641 (2000).

21. Mélo, T. J. A.- "Determinação por Transmissão de Luz da Distribuição de Tempos de Residência em Tempo Real na Extrusão", Tese de Doutorado, Universidade Federal de São Carlos, Brasil (2002).

22. Mélo, T. J. A. & Canevarolo, S. V.- submetido para Polym. Eng. Sci. (2002).

23. Mélo, T. J. A.; Calumby, R.B.R. & Canevarolo, S. V.- "Uso de traçadores com Diferentes Comportamentos Óticos na Determinação da DTR", in: Anais do 6o Congresso Brasileiro de Polímeros, CD-ROM, Gramado – RS, nov (2001).

24. Mélo, T. J. A. & Canevarolo, S.V.- "Comparação entre Traçadores Orgânico e Inorgânico na Medida da Distribuição de Tempos de Residência Durante a Extrusão", in: Anais do14o Congresso Brasileiro de Ciências e Engenharia de Materiais, CD-ROM, São Pedro – SP, Dez (2000).

25. Song, Z. & Baker, W. E.- J. Appl. Polym. Sci.. Part A: Polym. Chem.,30, p.1589 (1992).

26. Tobin, M.C.- J. Phys. Chem., 64, p.1 (1960).

27. Potente, H. & Lappe, H.- Plast. Rub. and Proc. Appls., 6, p.135 (1986).

28. Weiss, R. A. & Stamato, H.- Polym. Eng. Sci., 29, p.134 (1989).

29. Polance, R. & Jayaraman, K.- Polym. Eng. Sci., 35, p.1535 (1995).

30. Tzoganakis, C.; Tang, Y.; Vlachopoulos, J. & Hamielec, A.E.- J. of Appl. Polym. Sci., 37, p. 681 (1989).

31. Cassagnau, P.; Mijangos, C. & Michel, A.- Polym. Eng. Sci., 31, p. 772 (1991).

32. Poulesquen, A.; Vergnes, B.; Cassagnau, Ph. & Michel, A.- "Modelling of Residence Time Distribution in a Co-rotating Twin Screw Extruder", in: PPS, p.1, Montreal, (2001).

33. Dagli, S. S.; Xanthos, M. & Biesenberger, J.A.- Polym. Eng. Sci., 34, p.1720 (1994).

34. Wang, X.C., Tzoganakis, C. & Rempel, G.L. "Reactive Extrusion of PP-g-AA with Alkyl Amines". in: ANTEC, p.1449, (1994).

35. Canevarolo, S. V.; Calumby, R. B. R. & Mélo, T. J. A.- "Following Reactive Blending Extrusion Using an Optical Detector". in: PPS-18, Guimarães – Portugal (2002).

36. Canevarolo, S.V.; Mélo, T. J. A .; Covas, J. A. & Carneiro, O.S.- Int. Polym. Proc., 16, p. 334 (2001).



588370eb7f8c9d0a0c8b4634 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections