Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/doi/10.1590/S0104-14282002000100007
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Influência do Sistema de Vulcanização nas Propriedades da Mistura NBR/EPDM

The Influence of the Vulcanizing System on Curing, Mechanical and Ageing Properties of NBR/EPDM Blends

Soares, Bluma G.; Oliveira, Marcia G.

Downloads: 0
Views: 1003

Resumo

A mistura NBR/EPDM apresenta diferentes velocidades de cura, o que resulta na vulcanização heterogênea das fases, isto é, a fase NBR encontra-se em grande parte reticulada enquanto que a fase EPDM encontra-se pouco reticulada ou não-reticulada em casos extremos, prejudicando as propriedades finais da mistura. Este trabalho avalia os efeitos de diferentes sistemas de vulcanização à base de enxofre no processo de cura, na dureza, na resistência à tração, ao rasgamento e ao envelhecimento da mistura NBR/EPDM. Foram estudados os sistemas S/MBTS, S/TMTD e S/MBTS/TMTD variando-se a quantidade de enxofre em 0,3 e 1,0 phr. O processo de cura é influenciado pelo tipo de acelerador (MBTS, TMTD e a combinação destes) e pela quantidade de enxofre (0,3 e 1,0 phr) presente nas formulações. Esta influência é percebida na resistência à pré-cura e na velocidade de cura da mistura NBR/EPDM. A reticulação da fase EPDM também varia com o sistema de vulcanização empregado e influi diretamente nas propriedades mecânicas e na resistência ao envelhecimento.

Palavras-chave

Mistura de elastômeros, sistema de vulcanização, NBR, EPDM

Abstract

NBR and EPDM differ in the number of double bonds and also in polarity, thus presenting different cure rates. Their blends frequently result in a maldistribution of crosslinks. In this work, sulfur-based systems varying in accelerator type and sulfur amount were investigated as vulcanizing systems for NBR/EPDM blends. The accelerator type and the sulfur concentration affected the curing characteristics of the blends. Some formulations were able to crosslink the EPDM phase to a larger extent and consequently displayed better mechanical and ageing properties.

Keywords

Curing system, elastomer blends, NBR, EPDM

References



1. Duin, M.; Krans J. C. J. & Smedinga, J. - Kauts. Gummi Kunsts., 46, p.445 (1993).

2. Coran, A.Y. - Rubber Chem. Technol., 61, p.281 (1988).

3. Gardiner, J. B. - Rubber Chem. Technol., 42, p.1058 (1969).

4. Shershnev, V. A. - Rubber Chem. Technol., 55, p.537 (1982).

5. Akiba, M. & Hashim, A. S. - Prog. Polym. Sci., 22, p.475 (1997).

6. Coran, A.Y. - "Vulcanization" in: "Science and Technology", Eds: Mark, J.E., Erman, B. and Eirich, F.R., Academic Press Limited, London, UK (1994).

7. Krejsa, M. R. & Köenig, J. L. - Rubb. Chem. And Technol., 66, p.376 (1993).

8. Coran, A.Y. - "Vulcanization" in: "Encyclopedia of Polymer Science and Engineering", Eds: Mark, H., Bikales, N.M., Overberger, C. and Menges, G., John Wiley and Sons, New York, USA (1989).

9. Varghese, H.; Bhagawan, S. S. & Thomas, S. - J. Appl. Polym. Sci, 71, p.2335 (1999).

10. Cook, S. - Kauts. Gummi Kunsts., 52, p.350 (1999).

11. Joseph, R.; George, K. E.; Samad, E. A. A. & Francis, D. J. - Die Angewandte Makromolekulare Chemie, 163, p.37 (1988).

12. Ghoneim, A. M. & Ismail, M. N. - Polym.-Plast. Technol. Eng., 38, p.979 (1999).

13. Suma, N.; Joseph, R. & George, K. E. - J. Appl. Polym. Sci, 49, p.549 (1993).

14. Mastromatteo, R. P.; Mitchell, J. M. & Brett, T. J. - Rubber Chem. Technol., 44, p.1065 (1971).

15. Woods, M. E. & Davidson, J. A. - Rubber Chem. Technol., 49, p.112 (1976).

16. Setua, D.K.; Pandey, K.N.; Saxena, A.K. & Mathur, G.N., J. Appl. Polym. Sci., 74, p.480(1999).

17. Radusch, J. H.; Lämmer, E.; Halle, E. S. & Dudik, M. - Kauts. Gummi Kunsts., 46, p.703 (1993).

18.Mullins, L. - J. Polym. Sci., 19, p.225 (1956).

19. Duchacek, V. - J. Appl. Polym. Sci., 16, p.3245 (1972).

20. Konar, B. B. - J. Appl. Polym. Sci., 63, p.233 (1997).

21. Mathew, G.; Singh, R. P.; Lakshminarayanan, R. & Thomas, S. - J. Appl. Polym. Sci., 61, p.2035 (1996).

22. Elvira, M. R.; Macías, A.; Oteo, J. L.; Royo, J. & Rubio, J. - Die Angewandte Makromolekulare Chemie, 227, p.43 (1995).

23. Ding, R.; Leonov, A. Y. & Coran, A. Y. - Rubber Chem. Technol., 69, p.81 (1996).

24. Chough, S. H. & Chang, D. H. - J. Appl. Polym. Sci., 61, p.449 (1996).

25. Tripathy, A. R.; Gosh, M. K. & Das, C. K. - Kauts. Gummi Kunsts., 45, p.626 (1992).

26. Zapp, R. L. - Rubber Chem. Technol., 46, p.251 (1973).

27. Liau, W. B. & Cheng, K. C. - Polymer, 39, p.6007 (1998).

28. Mason, P. - Polymer, 5, p.625 (1964).

588370e57f8c9d0a0c8b4615 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections