Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/doi/10.1590/0104-1428.1583?lang=en
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Reciclagem Química do PET Pós-consumo: Caracterização Estrutural do Ácido Tereftálico e Efeito da Hidrólise Alcalina em Baixa Temperatura

Chemical Recycling of Post-consumer PET: Structural Characterization of Terephthalic acid and the Effect of Alkaline Hydrolysis at Low Temperature

Fonseca, Talitha Granja; De Almeida, Yeda Medeiros Bastos; Vinhas, Glória M.

Downloads: 7
Views: 1412

Resumo

Devido ao impacto ambiental causado pelo descarte de embalagens PET, a reciclagem desse material tem sido bastante discutida e avaliada. Em particular, a reciclagem química viabiliza a obtenção dos monômeros utilizados na fabricação da resina PET: o etilenoglicol (EG) e o ácido tereftálico (PTA). Por isso, estudos de otimização desse processo são importantes tanto do ponto de vista ambiental, quanto econômico. Neste trabalho foram investigados certos parâmetros que influenciam a reação de despolimerização do PET pós-consumo via hidrólise alcalina, a fim de obter o PTA. Os ensaios foram realizados à temperatura de 70 °C, variando a concentração da solução de hidróxido de sódio e o tempo de reação. Os melhores resultados foram obtidos para concentração de NaOH 10,82 mol L–1 e tempo de reação de 9 h. Consequentemente, foi possível comprovar a viabilidade do processo, uma vez que as análises por infravermelho e Ressonância Magnética Nuclear confirmaram a obtenção do PTA em todas as reações realizadas.

Palavras-chave

Despolimerização, PET, hidrólise alcalina

Abstract

Abstract: Due to the environmental impact caused by PET packaging disposal, this material recycling has been thoroughly discussed and evaluated. In particular, chemical recycling enables achievement of the monomers that are used in PET resin manufacture: ethylene glycol (EG) and terephthalic acid (PTA). Therefore, studies for this process optimization are important from environmental and economic points of view. The present study investigated certain parameters that influence the depolymerization reaction of PET post-consumer via alkaline hydrolysis in order to obtain PTA. Assays were performed at 70 °C by varying the concentration of sodium hydroxide and the reaction time. The best results were obtained at 10.82 mol L–1 NaOH and 9 h reaction time. Consequently, it was possible to prove this process viability, once analyses by infrared and nuclear magnetic resonance confirmed that PTA was obtained in all reactions performed

Keywords

Depolymerizing, PET, alkaline hydrolysis

References



1. Romão, W.; Spinacé, M. A. S. & De Paoli, M. A. - Polímeros, 19, p.121 (2009). http://dx.doi.org/10.1590/S0104- 14282009000200009.

2. Awaja, F. & Pavel, D. - Eur. Polym. J., 41, p.1453 (2005). http://dx.doi.org/10.1016/j.eurpolymj.2005.02.005.

3. Compromisso Empresarial para Reciclagem - CEMPRE - - “Fichas técnicas: PET”, CEMPRE. Disponível em: . Acesso em: jun. 2013.

4. Di Souza, L. Torres, M. C. M. & Ruvolo Filho, A. C. - Polímeros., 18, p.334 (2008). http://dx.doi.org/10.1590/ S0104-14282008000400013.

5. Mancini, S. D. & Zanin, M. - Polímeros, 12, p.34 (2002). http:// dx.doi.org/10.1590/S0104-14282002000100016. Curti, P. S. & Ruvolo Filho, A. C. - Polímeros, 16, p.276 (2006). http:// dx.doi.org/10.1590/S0104-14282006000400006

7. Abdelaal, M. Y.; Sobahi, T. R. & Makki, M. S. I. - Int. J. Polym. Mater., 57, p.73 (2008). http://dx.doi. org/10.1080/00914030701329080.

8. Adams, M. J. - “Chemometrics in analytical spectroscopy”, Springer Verlag, Cambridge (1995).

9. Oku, A.; Hu, L. C. & Yamada, E. - J. Appl. Polym. Sci.,

63, p.595 (1997). http://dx.doi.org/10.1002/(SICI)1097- 4628(19970131)63:5<595:AID-APP7>3.0.CO;2-P.
588371af7f8c9d0a0c8b49ff polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections