Polímeros: Ciência e Tecnologia
http://revistapolimeros.org.br/doi/10.1590/0104-1428.03016
Polímeros: Ciência e Tecnologia
Original Article

Compatibilization of recycled polypropylene and recycled poly (ethylene terephthalate) blends with SEBS-g-MA

Luciana Maria Guadagnini Araujo; Ana Rita Morales

Downloads: 0
Views: 71

Abstract

Abstract: The compatibilization of recycled PP/PET blend with high and low concentration (20 and 5 phr) of elastomer functionalized by maleic anhydride (SEBS-g-MA) was achieved. Recycled polypropylene from plastic industry and recycled PET from post-consumer bottles was used. PP/PET blends: 80:20 w/w, 50:50 w/w and 20:80 w/w were prepared in an internal mixer for mechanical properties, thermal properties, morphology and rheological properties. SEBS-g-MA promoted compatibilization of the PP/PET blends and improved their properties. With an increasing compatibilization level, the refinement of morphology was observed in the PET rich blend. Compatibilized blends showed negative deviation in the PET glass transition temperature related to neat PET, demonstrating that compatibilization was very successful. PET crystallization was accelerated in the blends due to PP presence that enhanced nucleation. It was found that the 50/50/20 blend showed huge potential for textile fiber application and that of 80/20/20 showed more intermediary properties than neat polymers.

Keywords

blends, compatibilization, PET, PP, recycled polymers, SEBS-g-MA

References

Utracki, L. A. (1998). Commercial polymer blends. Canada: Chapman & Hall. http://dx.doi.org/10.1007/978-1-4615-5789-0.

Associação Brasileira da Indústria do Plástico – ABIPLAST. (2014). Perfil 2014 da indústria brasileira de transformação de material plástico. Retrieved 2015 November 9, from http://www.abiplast.org.br/site/estatisticas

Associação Brasileira da Indústria do PET – ABIPET. (2013). 9º CENSO da Reciclagem de PET no Brasil, 2013. Retrieved 2015 April 9, from http://www.abipet.org.br

Papadopoulou, C. P., & Kalfoglou, N. K. (2000). Comparison of compatibilizer effectiveness for PET/PP blends: their mechanical, thermal and morphology characterization. Polymer, 41(7), 2543-2555. http://dx.doi.org/10.1016/S0032-3861(99)00442-5.

Bataille, P., Boissé, S., & Schreiber, H. P. (1987). Mechanical properties and permeability of polypropylene and poly(ethylene terephthalate) mixtures. Polymer Engineering and Science, 27(9), 622-626. http://dx.doi.org/10.1002/pen.760270904.

Kordjazi, Z., & Ebrahimi, N. G. (2010). Rheological rehavior of noncompatibilized and compatibilized PP/PET blends with SEBS-g-MA. Journal of Applied Polymer Science , 116(1), 441-448. http://dx.doi.org/10.1002/app.31471.

Ballauri, B., Trabuio, M., & La Mantia, F. P. (1996). Compatibilization of recycle polyethyleneterephthalate/polypropylene blends using a funcionalized rubber. In F. P. La Mantia (Ed.), Recycling of PVC and mixed plastic waste (pp. 77-91). Italy: ChemTec Publishing.

Xanthos, M., Young, M. W., & Biesenberger, J. A. (1990). Polypropylene/polyethylene terephthalate blends compatibilized through functionalization. Polymer Engineering and Science, 30(6), 355-365. http://dx.doi.org/10.1002/pen.760300607.

Heino, M., Kirjava, J., Hietaoja, P., & Seppala, J. (1997). Compatibilization of polyethylene terephtalate/polypropylene blends with styrene-Ethylene/Butylene Styrene (SEBS) block copolymers. Journal of Applied Polymer Science, 65(2), 241-249. http://dx.doi.org/10.1002/(SICI)1097-4628(19970711)65:2<241::AID-APP4>3.0.CO;2-O.

Khonakdar, H. A., Jafari, S. H., Mirzadeh, S., Kalaee, M. R., Zare, D., & Saeb, M. R. (2013). Rheology-morphology correlation in PET/PP blends: influence of type of compatibilizer. Journal of Vinyl & Additive Technology, 19(1), 25-30. http://dx.doi.org/10.1002/vnl.20318.

Canevarolo, S. V. Jr. (2006). Ciência dos polímeros. São Paulo: Artliber.

Chanda, M., & Roy, S. K. (2006). Plastics properties and testing in plastics technology handbook. New York: Taylor and Fracis Group LLC.

Jamaludin, N. A., Inuwa, I. M., Hassan, A., Othman, N., & Jawaid, M. (2015). Mechanical and thermal properties of SEBS-g-MA compatibilized hallosyte nanotubes reinforced polyethylene terephthalate/polycarbonate/nanocomposites. Journal of Applied Polymer Science , 132(39), 1-10.http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?cmd=Retrieve&db=PubMed&list_uids=25866416&dopt=Abstract http://dx.doi.org/10.1002/app.42608.

Majesté, J. C., & Santamaría, A. (2011). Rheology and viscoelasticity of multiphase polymer systems: blends and block copolymers. In A. Boudenne, L. Laurent Ibos, Y. Candau, & S. Thomas (Eds.), Handbook of multiphase polymer systems (pp. 311-357). Chichester: John Wiley & Sons. http://dx.doi.org/10.1002/9781119972020.ch8.

Pang, Y. X., Jia, D. M., Hu, H. J., Hourston, D. J., & Song, M. (2000). Effects of a compatibilizing agent on the morphology, interface and mechanical behaviour of polypropylene/poly(ethylene terephthalate) blends. Polymer, 41(1), 357-365. http://dx.doi.org/10.1016/S0032-3861(99)00123-8.

Carté, T. L., & Moet, A. (1993). Morphological Origin of Super Toughness in Poly(ethylene Terephthalate)/Polyethylene Blends. Journal of Applied Polymer Science , 48(4), 611-624. http://dx.doi.org/10.1002/app.1993.070480405.

Rabello, M. (2007). Aditivação de polímeros . São Paulo: Artliber.

Callister, W. D., Jr. (2007). Materials science and engineering. New York: Wiley and Sons.
 

5b7c4e5f0e8825d35b896e51 polimeros Articles
Links & Downloads

Polimeros

Share this page
Page Sections