Polímeros: Ciência e Tecnologia
https://revistapolimeros.org.br/article/doi/10.4322/polimeros.2013.046
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Tratamento da Superfície de Cateteres de Poliamida 11 por Plasma de Oxigênio

SURFACE TREATMENT OF POLYMIDE 11 CATHETERS BY OXYGEN PLASMA

Salmoria, Gean V.; Martins, Waldemar F. M.; Fucio, Debora M.

Downloads: 0
Views: 1116

Resumo

A poliamida 11, assim como grande parte dos polímeros empregados na construção de dispositivos minimamente invasivos de uso médico, não apresenta significativa interação com líquidos polares, o que limita seu uso em algumas aplicações, uma vez que a maioria dos tecidos biológicos internos apresenta caráter hidrofílico (alta afinidade por água). No presente trabalho, investigou-se a influência do processo de tratamento por plasma de oxigênio da superfície da poliamida 11 sobre a composição, rugosidade e a hidrofilicidade. Através do tratamento, as características do material foram alteradas de forma a favorecer a adesão de uma camada polimérica hidrofílica sobre sua superfície, aumentando a hidrofilicidade e, consequentemente, a biocompatibilidade do dispositivo polimérico. Cateteres de poliamida 11 foram submetidos a diferentes tempos de exposição ao plasma, gerado sob uma atmosfera de oxigênio com pressão, temperatura e voltagem constante. Para isso, foram realizadas análises de espectroscopia de infravermelho, microscopia eletrônica de varredura e medida do ângulo de molhamento por água na superfície do polímero. As amostras tratadas e não tratadas (controle) foram caracterizadas e constatou-se um aumento na rugosidade e no ângulo de contato, indicando uma possível melhora da aderência da camada polimérica hidrofílica a ser depositada.

Palavras-chave

Cateteres PA11, tratamento superfície, plasma de oxigênio

Abstract

Polyamide 11, as well as the great majority of polymers used in the construction of minimally invasive devices for medical use, shows no significant interaction with polar liquids, which limits its use in some applications, since most of internal biological tissues has hydrophilic character (high affinity for water). In this study, it was investigated the influence of oxygen plasma treatment of polyamide 11 surface on the composition, roughness and hydrophilicity. According to this treatment, the characteristics of the material were changed in order to favor the adhesion of a hydrophilic polymer layer on its surface, increasing the hydrophilicity and, consequently, the biocompatility of the polymeric device. Polyamide 11 catheters were submitted to different times of exposure to plasma, generated in an oxygen atmosphere with pressure, temperature and constant voltage. Then, it was done infrared spectroscopy, scanning electron microscope and contact angle measurement wettability by water on polymer surface analysis. The treated and untreated (control) samples were characterized and it was detected an enhancement in roughness and the contact angle, indicating a possible improvement of the adherence of the hydrophilic layer to be coated.

Keywords

Cateteres PA11, tratamento superfície, plasma de oxigênio

References

[1] Laporte, R. J. - “Hydrophilic Polymer Coatings for Medical Devices: Structure/Properties, Development, Manufacture and Applications”, Technomic, Claremont (1997).

[2] Baijal, M. D. – “Plastics Polymers Science and Technology”, John Wiley & Sons, New York (1982).

[3] Costa, T.H.C.; Feitor, M.C.; Alves J.C.; Freire, P. B.; Bezera, C.M., Journal of Materials Processing Technology, 173, p.40 (2006) .

[4] Wertheirmer, M.R.; Fozza, A.C.; Hollader, A., Nucl. Instr. and Meth. in Phys.Res.B, 151, p.65- 75 (1999).

[5] Vohrer, U.; Muller, M.; Oehr, C., Surface & Coatings Technology, 98, p.1128-1131 (1998).

[6] Song, J.; Gunst, U.; Arlinghaus, H.F.; Vancso, G.J., Applied Surface Science, 253, p.9489-9499 (2007).

[7] Van Krevelen, D.W. – “Properties of polymers: their correlation with chemical structure; their numerical estimation and prediction from additive group contributions”, Elsevier Science, Amsterdam (1997).

[8] Ferrero, F., Polymer Testing, 22, p.571-578 (2003).

[9] Acquarulo, L. A.; O’Neil, C. J.; Nilajkar, A. S. – “Lubricious Compounds for Biomedical Applications Using Hydrophilic Polymers”, World Intellectual Property Organization, Switzerland (2006).

[10] Dorai, R., Kushner, M.J., Journal of Physics D: Applied Physics, 36, p.666-685 (2003).

[11] Carrino, L., Maroni, G.; Polini, W., Journal of Materials Processing Technology, 121, p.373- 382 (2002).

[12] Mark, J. E. – “Polymer Data Handbook”, Oxford University Press, United Kingdom (1999).

[13] Silverstein, R. M.; Bassler, G. C.; Morrill, T. C. – “Spectrometric Identification of Organic Compounds”, John Wiley & Sons, New York (1995).

[14] Costa, T.H.C.; Feitor, M.C.; Alves JR, C.; Bezerra, C.M., Revista Matéria, 13, p.130 (2008).

[15] Rangel, E.C.; Bento, W.C.A.; Rangel, R.C.C.; Cruz, N.C., Revista Brasileira de Aplicações de Vácuo, 26, p.165-171 (2007).

5883718c7f8c9d0a0c8b4958 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections